GE / IP FANUC Series 90/30 En stock
Fabricante: | Allen Bradley - PLC |
tipo de producto: | PLC/Programmable Logic Controller |
Número de pieza: | 1771-P2 |
Serie: | PLC 5 |
Descripción:
Esta fuente de alimentación auxiliar 1771-P2 se envía de fábrica para aplicaciones de 120 VCA. Puede utilizar modos de operación de 120 voltios CA y 220-240 voltios CA. La protección con fusible también está disponible para la unidad de fuente de alimentación 1771-P2 .
Automation Stop NO es un distribuidor autorizado de este fabricante y, por lo tanto, no se aplica la garantía del fabricante. El producto viene con Automation Stop's 1 año de garantía.
En busca de un1771-P2? Podemos ayudar!
Solicitar presupuestoCaracterísticas clave:
Aceptamos tarjetas de crédito de los principales proveedores, así como PayPal.
Ofrecemos envíos a todo el mundo con UPS y DHL.
Estamos orgullosos de ofrecer una garantía de parada de automatización de un año en la mayoría de los productos.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.
This 1771-P2 is an auxiliary power supply unit by Allen-Bradley and Rockwell Automation. The power supply is factory shipped for 120 Volt AC operation. You can use 120 Volt AC and 220 to 240 Volt AC modes of operation. Fuse protection is also supported by the power supply. The fuse is a 1-Ampere slow blow fuse for 120 Volt AC operation and the 0.5 Ampere fuse is used for 220 to 240 Volt AC operation. The fuse rating is reliant on the mode of operation.
The 1771-P2 has a minimum voltage of 92.0 Volts and a normal input range of 98 to 132 Volts AC while using 120 Volts AC for operation. The minimum voltage is 184 Volts with a normal input range of 196 to 250 Volts AC for using 220 to 240 Volts AC for operating mode. The nominal input voltage or current of the power supply unit is 0.75 Amperes at 120 Volts AC and 0.38 Amperes at 220 to 240 Volts AC. The real input power is 65 Watts at full load and the apparent input power is 90 Volts AC at full load. It has a 50/60 Hertz frequency range and the maximum output current is 6.5 Amperes at 5 Volts DC. The input power to equipment chassis/ground isolation voltages are 2500 Volts DC and 1800 Volts RMS that are both for 1 millisecond. It has a 5.1 Volt DC +/-5% output voltage each for logic circuit and memory. The power loss time delay of this power supply is 13.5 milliseconds +/- 2.5 milliseconds for input power loss to the disabled processor. The operation temperature is 32 to 140 degrees Celsius. This auxiliary power supply unit can power single 1771 chassis installed with single communication adapter, 1771 mini PLC2, and 1771 mini PLC 2/15.
Serie | Fuente de alimentación auxiliar |
Número de pieza | 1771-P2 |
Rango de voltaje de entrada para operación de 120V | 98 - 132 V CA |
Rango de voltaje de entrada para operación de 220/240V | 196-250 V CA |
Tensión/corriente de entrada nominal | 120 V CA a 0,75 A/220/240 V CA a 0,38 A |
Potencia de entrada | 65W @ carga completa / 90VA @ carga completa |
Transformador externo (si se usa) | 160VA a plena carga |
Rango de frecuencia | 50/60 Hz |
Tensión de salida | 5,1 V CC ± 5 % |
Corriente de salida | 6,5 A máximo a 5 V CC |
Retardo de tiempo de pérdida de energía | 13,5 ms ± 2,5 ms |
fusibles | Fusible de acción lenta de 1 x 1 amperio para operación de CA de 120 voltios / Fusible de acción lenta de 1 x 0,5 amperios para operación de CA de 220/240 voltios |
cabos | 1771 CD / 1771 EC |
Peso | 5,89 kg (13 libras) |
Dimensiones (An x Al x Pr) | 11,6 cm x 28,6 cm x 18,2 cm (4,56" x 11,25" x 7,16") |
Temperatura de funcionamiento | 0 a 60°C (32 a 140°F) |
Marca | Allen Bradley |
Fabricante | Rockwell Automation |
Tipo de módulo | Fuente de alimentación |
Entrada de CA | 120/220/240 voltios |
Salida CC | 6,5 amperios a 5 voltios |
Voltaje de entrada nominal | 120 VCA @ 75 Amperios, 220/240 VCA @ 38 Amperios |
Rango de voltaje de entrada | 98 a 132 VCA/196 a 250 VCA |
Potencia máxima de entrada real | 65 vatios a carga completa |
Corriente de salida del backplane | 6,5 amperios máx. @ 5 VCC |
Fusible | Bussman con n.º de pieza MDL 1A/ Fusible pequeño con n.º de pieza 313001 |
Fuente de alimentación paralela compatible | 1771-P10 |
Cableado | 1771-AC |
Localización | Chasis 1771, 2 ranuras |
Dimensiones | 2 ranuras de chasis |
Pregunta: ¿Automation Stop ofrece reparaciones en el 1771-P2?
Respuesta: Si. Ofrecemos reparaciones para el 1771-P2 y viene con nuestra garantía de parada de automatización de 1 año.
Pregunta: ¿Qué tipo de garantía viene con Allen Bradley - PLC y 1771-P2?
Respuesta: Si compra el 1771-P2 a través de Automationstop.com, viene con nuestra garantía de 1 año y ninguna otra garantía.
Pregunta: ¿Puedo comprar el 1771-P2 en línea ?
Respuesta: si Automation Stop vende el 1771-P2 en línea y puede consultar la cantidad y el estado disponibles arriba.
Pregunta: ¿Cuál es el fabricante del 1771-P2?
Respuesta: El 1771-P2 está fabricado por Allen Bradley-PLC .
Pregunta: ¿Qué tipo de producto es el 1771-P2?
Respuesta: El 1771-P2 es parte de la serie PLC 5 .
Question: What is the alternating current (AC) Input of the 1771-P2?
Answer: The 1771-P2 has a alternating current (AC) Input of 120/220/240 Volts.
Question: What is the Backplane Output Current of the 1771-P2?
Answer: The Backplane Output Current of the Rockwell Automation 1771-P2 is 6.5 Amperes max. @ 5 VDC.
Question: What Brand is included with the 1771-P2?
Answer: The 1771-P2 has a Allen Bradley (AB) Brand.
Question: What Cables does the Allen Bradley/Rockwell Automation 1771-P2 have?
Answer: The 1771-P2 has a Cables of 1771 CD / 1771 CE.
Question: What is the Cabling of the 1771-P2?
Answer: The Cabling of the Allen-Bradley 1771-P2 is 1771-CT.
Question: What Compatible Parallel power supply unit does the Allen-Bradley 1771-P2 have?
Answer: The Compatible Parallel power supply of the Allen-Bradley 1771-P2 is 1771-P10.
Question: What is the DC (direct current) Output of the 1771-P2?
Answer: The DC (direct current) Output of the 1771-P2 is 6.5 Amperes at 5 Volts.
Question: What Dimensions does the Allen-Bradley 1771-P2 have?
Answer: The 1771-P2 has a Dimensions of 2 Chassis Slots.
Question: What is the Dimensions (W x H x D) of the 1771-P2?
Answer: The 1771-P2 has a Dimensions (W x H x D) of 11.6cm x 28.6cm x 18.2cm (4.56" x 11.25" x 7.16").
Question: What is the External Transformer (if used) of the 1771-P2?
Answer: The External Transformer (if used) of the 1771-P2 is 160VA @ full load.
Question: What is the Frequency range of the 1771-P2?
Answer: The Allen Bradley-Rockwell Automation 1771-P2 has a Frequency range of 50/60 Hz.
Question: Does the 1771-P2 have a Fuse?
Answer: Bussman with unit No. MDL 1A/ Little Fuse with unit No. 313001.
Question: What is the Fuses of the Allen Bradley/Rockwell Automation 1771-P2?
Answer: The Fuses of the 1771-P2 is 1 x 1 ampere slow-blow fuse for 120 volts AC (alternating current) operation / 1 x 0.5 amperes slow-blow fuse for 220/240 volts AC (alternating current) operation.
Question: What is the Input power of the 1771-P2?
Answer: The Rockwell-Automation 1771-P2 has a Input power of 65W (watts)@ full load / 90VA @ full load.
Question: What is the Input Voltage Range of the 1771-P2?
Answer: The Allen Bradley-Rockwell Automation 1771-P2 has a Input Voltage Range of 98 to 132 voltage alternating current (VAC)/196 to 250 voltage alternating current (VAC).
Question: What is the Input voltage range for 120 volts operation of the Allen Bradley 1771-P2?
Answer: The Input voltage range for 120 volts operation of the 1771-P2 is 98 - 120 volts AC (alternating current).
Question: What Input voltage range for 220/240 volts operation does the 1771-P2 have?
Answer: The Rockwell-Automation 1771-P2 has a Input voltage range for 220/240 volts operation of 196-240 volts AC (alternating current).
Question: What is the Location of the 1771-P2?
Answer: The Location of the Allen Bradley/Rockwell Automation 1771-P2 is 1771 Chassis, 2 Slots.
Question: What is the Maximum Real Input Power of the Rockwell-Automation 1771-P2?
Answer: The Maximum Real Input Power of the 1771-P2 is 65 Watts @ Full Load.
Question: What Module Type does the 1771-P2 have?
Answer: The Rockwell-Automation 1771-P2 has a power supply component Module Type.
Question: What Nominal Input Voltage does the 1771-P2 have?
Answer: The 1771-P2 has a Nominal Input Voltage of 120 VAC (voltage alternating current) @ 75 Amperes, 220/240 VAC (voltage alternating current) @ 38 Amperes.
Question: What Nominal Input Voltage/Current does the Allen Bradley 1771-P2 have?
Answer: The 1771-P2 has a Nominal Input Voltage/Current of 120 volts alternating current (AC) @ .75A / 220/120 volts alternating current (AC) @ .38A.
Question: What Operating temperature does the 1771-P2 have?
Answer: The Operating temperature of the 1771-P2 is 0 to 60°C (32 to 140°F).
Question: What Output Current does the Allen Bradley Automation 1771-P2 have?
Answer: The 1771-P2 has a Output Current of 6.5A maximum @ 5 volts DC.
Question: What Output voltage does the 1771-P2 have?
Answer: The Output voltage of the Rockwell Automation 1771-P2 is 5.1 volts DC (direct current) ± 5%.
Question: What component Number does the 1771-P2 have?
Answer: The 1771-P2 has a part Number of 1771-P2.
Question: What Power Loss Time Delay does the 1771-P2 have?
Answer: The Power Loss Time Delay of the Rockwell-Automation 1771-P2 is 13.5ms ± 2.5ms.
Question: What Weight does the 1771-P2 have?
Answer: The Allen Bradley 1771-P2 has a Weight of 5.89 kg (13 lbs).
Para obtener información adicional sobre 1771-P2 consulte la hoja de datos o el manual. También consulte el manual en PDF para ver todos los diagramas de cableado, compatibilidad, resolución de problemas, especificaciones, instrucciones de instalación y accesorios (como baterías, bloques de terminales o cables) relacionados con1771-P2.
Parte de revisión # | También conocido como | Disponibilidad |
---|---|---|
1771-P2/A | 1771-P2 Ser A, Serie A, Rev A | Solicitar presupuesto |
1771-P2/B | 1771-P2 Ser B, Serie B, Rev B | Solicitar presupuesto |
1771-P2/C | 1771-P2 Ser C, Serie C, Rev C | Solicitar presupuesto |
1771-P2/D | 1771-P2 Ser D, Serie D, Rev D | Solicitar presupuesto |
1771-P2/E | 1771-P2 Ser E, Serie E, Rev E | Solicitar presupuesto |
1771-P2/F | 1771-P2 Ser F, Serie F, Rev F | Solicitar presupuesto |
1771-P2/G | 1771-P2 Ser G, Serie G, Rev G | Solicitar presupuesto |
1771-P2/H | 1771-P2 Ser H, Serie H, Rev H | Solicitar presupuesto |
1771-P2/I | 1771-P2 Ser I, Serie I, Rev I | Solicitar presupuesto |
1771-P2/J | 1771-P2 Ser J, Serie J, Rev J | Solicitar presupuesto |
1771-P2/K | 1771-P2 Ser K, Serie K, Rev K | Solicitar presupuesto |
1771-P2/L | 1771-P2 Ser L, Serie L, Rev L | Solicitar presupuesto |
1771-P2/M | 1771-P2 Ser M, Serie M, Rev M | Solicitar presupuesto |
1771-P2/N | 1771-P2 Ser N, Serie N, Rev N | Solicitar presupuesto |
1771-P2/O | 1771-P2 Ser O, Serie O, Rev O | Solicitar presupuesto |
1771-P2/P | 1771-P2 Ser P, Serie P, Rev P | Solicitar presupuesto |
1771-P2/Q | 1771-P2 Ser Q, Serie Q, Rev Q | Solicitar presupuesto |
1771-P2/R | 1771-P2 Ser R, Serie R, Rev R | Solicitar presupuesto |
1771-P2/S | 1771-P2 Ser S, Serie S, Rev S | Solicitar presupuesto |
1771-P2/T | 1771-P2 Ser T, Serie T, Rev T | Solicitar presupuesto |
1771-P2/U | 1771-P2 Ser U, Serie U, Rev U | Solicitar presupuesto |
1771-P2/V | 1771-P2 Ser V, Serie V, Rev V | Solicitar presupuesto |
1771-P2/W | 1771-P2 Ser W, Serie W, Rev W | Solicitar presupuesto |
Errores ortográficos comunes:
Automation Stop vende excedentes de productos usados. Automation Stop no es un distribuidor, afiliado o representante autorizado de las marcas que comercializamos. Productos vendidos por Automation Stop ven con Automation Stop’s 1 año de garantía y no vienen con la garantía del fabricante original. Las marcas comerciales designadas, los nombres comerciales y las marcas que aparecen en este documento son propiedad de sus respectivos dueños. Este sitio web no está sancionado ni aprobado por ningún fabricante o nombre comercial mencionado.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.