1792D-4BVT4D

Part number 792D-4BVT4D is an input / output module designed by Allen-Bradley. This product is an ArmorBlock MaXum 4 input / 4 output module. This Allen-Bradley I/O module is a twenty-four (24) volt DC (direct current) Input/Output device. This device communicated through the DeviceNet network. This module does not require an enclosure due to its sealed housing. The four (4) inputs and four (4) outputs located on this device may be accessed via Y splitter cables. The inputs of this device are twenty-four (24) volts DC PNP (sourcing) or NPN (sinking) devices. The outputs of this device, however, are four (4) self-protected twenty-four (24) volt DC outputs that can provide up to one (1.0) ampere of current each.

The sensor source current per connection of this device is one hundred (100) milliamperes total. Additionally, the off-wire sense current is zero-point-five (0.5) milliamperes. This I/O module has an on-state voltage minimum of ten (10) volts DC and a maximum of twenty-five (25) volts DC. The on-state current minimum is two (2) milliamperes and the maximum is ten (10) milliamperes. This module's off-state voltage is five (5) volts DC max while the off-state current is one-point-five (1.5) milliamperes minimum. This module is recommended to only be operated when the surrounding temperature ranges from negative twenty-five (-25) to positive sixty (+60) degrees Celsius (-13 to 140 °F). When storing this I/O module, the surrounding temperature should be maintained within the range of negative twenty-five (-25) to positive eighty (+80) degrees Celsius (-13 to 176 °F). Additionally, the relative humidity of the surrounding area should be 5% to 100%. The dimensions of this I/O module measure 48.26 millimeters x 68.6 millimeters x 120 millimeters.