Allen-Bradley 150-F60NBD

The Allen-Bradley 150-F60NBD SMC FLEX smart motor controller improves the motor start and stop efficiency using microprocessor-based soft starters with seven start/stop modes. This Allen-Bradley 150-F60NBD SMC FLEX smart motor controller can be used with 3-phases motors and includes six silicon controlled rectifiers (SCRs) to adjust the conduction period time, minimize the heat and monitor the voltage and the torque of the motor during different phases such as starting, running and stopping. This Allen-Bradley 150-F60NBD SMC FLEX smart motor controller delivers a power of 40 horsepower and 30 kilowatts. This Allen-Bradley 150-F60NBD SMC FLEX smart motor controller permits to control the voltage rating range from 100 volts AC to 240 volts AC with a motor current draw of 60 amperes. The Allen-Bradley 150-F60NBD SMC FLEX smart motor modular controller provides a front keypad with liquid crystal display (LCD). The Allen-Bradley 150-F60NBD SMC FLEX smart motor modular controller includes one DPI port to link optional human interface and one DPI to connect communication modules.

This Allen-Bradley 150-F60NBD SMC FLEX smart motor solid-state controller handles the SCRs in the circuit switching current to enhance robustness for harsher environments such as shock-type loads and aggressive duty cycles. The Allen-Bradley 150-F60NBD SMC FLEX smart motor solid-state controller includes a compact footprint and design with a cost-effective enclosure, overload security, integrated bypass and motor system fault diagnostics. The Allen-Bradley 150-F60NBD smart motor solid-state controller includes a rotary dial and dual-in-line (DIP) switches to make an easy and secure installation to control 3-phase motors. The Allen-Bradley 150-F60NBD SMC FLEX smart motor solid-state controller is suitable for industrial applications. This Allen-Bradley 150-F60NBD SMC FLEX smart motor solid-state controller can operate at a temperature range of -5 degrees to +50 degrees Celsius (23 degrees to 122 degrees Fahrenheit) for industrial applications and weighs approximately 5.7 kilograms (12.5 pounds) while shipping.

The Allen-Bradley 150-F60NBD is equipped with a keypad and a liquid crystal display, or LCD, to allow an operator to interact with the device. This keypad, which is attached on the front of this smart motor controller, has 5 (five) keys that one may interact with. The keypad features one (1) "escape" key, one (1) "select" key, one (1) "enter" key, and two (2) directional keys. These directional keys are the keys for "up" and "down." When needing to clear a fault, one may hold the "escape" key on the keypad for three (3) seconds. The LCD, or Liquid Crystal Display, of this device has three (3) lines of display for sixteen (16) characters. This LCD display is backlit. 

There are many precautions to take when one is storing the Allen-Bradley 150-F60NBD FLEX smart motor controller. This device must be kept in a location that is dry and clean. The storage area for this device must maintain an ambient temperature that stays within the range of -20 and +75 degrees Celsius, or -4 and +167 degrees Fahrenheit. The humidity must also come into consideration when one wants to store this device. The relative humidity must stay within a range of 0% to 95% non-condensing. It is important that this Allen-Bradley product must not be stored in an area whose atmosphere may be corrosive, as the product could get badly damaged. It is recommended this product must not be stored near a construction area as to not damage the product's integrity.