GE / IP FANUC Series 90/30 En stock
Fabricante: | Emerson - GE Fanuc |
tipo de producto: | Automation Product |
Número de pieza: | IC660BBS102 |
Serie: | Genius I/O |
UPC: | 44756951858 |
Descripción:
IC660BBS102 es un bloque de E/S Genius, que cuenta con ocho salidas que se dividen en cuatro grupos iguales. El bloque de salida se puede conectar a un monitor. El bloque de salida IC660BBS102 tiene especificaciones de voltaje nominal de 115 voltios de corriente alterna (CA) y 125 voltios de corriente continua (CC). La tasa de disipación de calor de este módulo es de 45,6 vatios. Mide 8,8 pulgadas x 3,3 pulgadas x 3,9 pulgadas y pesa aproximadamente 4 libras.
Características clave:
Automation Stop NO es un distribuidor autorizado de este fabricante y, por lo tanto, no se aplica la garantía del fabricante. El producto viene con Automation Stop's 1 año de garantía.
Aceptamos tarjetas de crédito de los principales proveedores, así como PayPal.
Ofrecemos envíos a todo el mundo con UPS y DHL.
Estamos orgullosos de ofrecer una garantía de parada de automatización de un año en la mayoría de los productos.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.
The IC660BBS102 is a 115 Volt AC/125 Volt DC Isolated Genius I/O Block by GE Fanuc Emerson. It has an isolation that is rated to withstand 250 Volts AC/DC continuous between any group and ground or between any two groups. This IC660BBS102 block in particular reports a ‘failed switch’ diagnostic if any of the outputs have a commanded state that is different than the actual state of the block internal switch. Block specifications for this hardware include a size of 8.83 x 3.34 x 3.91 inches, or 22.44 x 8.48 x 9.93 centimeters. The approximate weight of the IC660BBS102 is 4 pounds, or 1.8 kilograms. The block has LED indicators for Unit OK and I/O Enabled. Block to block isolation is 1500 Volts and it has a required control power of 8 Watts maximum (block only). Operating voltage (AC) for the IC660BBS102 is 93-132 Volts AC and 105-132 Volts DC for direct current.
Input specifications for the IC660BBS102 include an input processing time (typical) of 2 milliseconds + filter for alternating current and 0.8 milliseconds + filter for direct current. Selectable input filter times are 10 to 100 milliseconds in 10-millisecond increments. Output specifications for this piece of hardware include a maximum switching frequency of once per second and a voltage drop (at 2 Amperes) of 2.5 Volts; Voltage drop at 30-Ampere inrush is 10 Volts. Environmental specifications include an operating temperature range between 0 and 60 degrees Celsius and a storage temperature range between -40 and 100 degrees Celsius; humidity is 5% to 95% (non-condensing). This IC660BBS102 block has a vibration of 5-10 Hertz 0.2” (5.08 millimeter) displacement, 10-200 Hertz at 1G.
According to the manufacturer, the IC660BBS102 can continuously sustain 250 volts alternating current (AC)/direct current (DC) within any two groups: two grounds, or between a group & ground. The transient rate for the block is 2000 volts for 10 seconds. Alternating current/direct current circuit voltage, CPU redundancy, default for output power, and a programmable input filter that supports from 10 milliseconds to 100 milliseconds are all configurable features.
The isolated I/O block should work as long as terminals 5 and 6 are powered. The output circuits are protected by the switching device's short circuit level sensor. As "open equipment," Genius I/O blocks must be mounted in a protective enclosure that is clean, free of airborne pollutants, and has appropriate cooling airflow.
For a fresh block, outputs are programmed to report No-Load circumstances. The mounting screws on the block should not be utilized as the sole means of grounding the block. Upside down or right side up are both acceptable positions for the block to be mounted in. It is important to leave at least 2 inches between each block. The IC660HHM501 handheld monitor is well suited with the IC660BBS102 block. The block is also compatible with any bus controller from GE Fanuc.
Previous versions of this I/O terminal block are compatible with the following blocks: the IC660CBS100, the 1C660BBS100, and the IC660BBS101. One AWG 12 or AWG 14 cable wires during field wiring are accepted by all terminals. The ring terminals that measure up to 0.27 inches can be accommodated in terminals labeled 1 to 4. All terminals should be torqued to 6 inches/lb. The IC660BBS102 output block enables CPU redundancy as well as the voltage from an AC or DC source.
Marca | Ge Fanuc Emerson |
Tamaño | 8,83 x 3,34 x 3,91 pulgadas (22,44 x 8,48 x 9,93 centímetros) |
Peso | 4 libras (1.8 kilogramos) |
LED | Unidad OK, E / S habilitada |
Aislamiento de bloque a bloque | 1500 voltios |
Poder de control requerido | 8 vatios, máx. (solo bloque) |
Caída de voltaje (a 2 amperios) | 2,5 voltios |
Caída de voltaje (a 30 amperios de irrupción) | 10 voltios |
Temperatura de funcionamiento | 0 a 60 grados centígrados |
Temperatura de almacenamiento | -40 a 100 grados Celsius |
Humedad | 5% a 95% (sin condensación) |
Vibración | 5-10 hercios 0,2 "(5,08 milímetros) de desplazamiento, 10-200 hercios a 1G |
Pregunta: ¿Automation Stop ofrece reparaciones en el IC660BBS102?
Respuesta: Si. Ofrecemos reparaciones para el IC660BBS102 y viene con nuestra garantía de parada de automatización de 1 año.
Pregunta: ¿Qué tipo de garantía viene con Emerson - GE Fanuc e IC660BBS102?
Respuesta: Si compra el IC660BBS102 a través de Automationstop.com, viene con nuestra garantía de 1 año y ninguna otra garantía.
Pregunta: ¿Puedo comprar el IC660BBS102 en línea ?
Respuesta: si Automation Stop vende el IC660BBS102 en línea y puede consultar la cantidad y el estado disponibles arriba.
Pregunta: ¿Cuál es el fabricante del IC660BBS102?
Respuesta: El IC660BBS102 está fabricado por Emerson-GE Fanuc .
Question: What Block to Block Isolation does the IC660BBS102 have?
Answer: The Block to Block Isolation of the Allen Bradley/Rockwell Automation IC660BBS102 is 1500 Volts.
Question: What Brand is included with the Allen Bradley-Rockwell Automation IC660BBS102?
Answer: The IC660BBS102 has a Ge Fanuc Emerson Brand.
Question: What Humidity does the IC660BBS102 have?
Answer: The IC660BBS102 has a Humidity of 5% to 95% (non-condensing).
Question: What LEDs are included with the IC660BBS102?
Answer: The IC660BBS102 includes Unit OK, input/output Enabled for its LEDs.
Question: What is the Operating Temperature of the IC660BBS102?
Answer: The Operating Temperature of the IC660BBS102 is 0 to 60 degrees Celsius.
Question: What is the Required Control Power of the Allen Bradley Automation IC660BBS102?
Answer: The Allen Bradley Automation IC660BBS102 has a Required Control Power of 8 Watts, max. (block only).
Question: What Size does the IC660BBS102 have?
Answer: The Allen-Bradley IC660BBS102 has a Size of 8.83 x 3.34 x 3.91 inch (22.44 x 8.48 x 9.93 centimeters).
Question: What Storage Temperature does the Allen Bradley IC660BBS102 have?
Answer: The Storage Temperature of the Allen Bradley IC660BBS102 is -40 to 100 degrees Celsius.
Question: What Vibration does the IC660BBS102 have?
Answer: The IC660BBS102 has a Vibration of 5-10 Hertz 0.2" (5.08 millimeters) displacement, 10-200 Hertz at 1G.
Question: What Voltage Drop (at 2 Amperes) does the IC660BBS102 have?
Answer: The Allen-Bradley IC660BBS102 has a Voltage Drop (at 2 Amperes) of 2.5 Volts.
Question: What is the Voltage Drop (at 30 Amperes Inrush) of the Allen Bradley Automation IC660BBS102?
Answer: The IC660BBS102 has a Voltage Drop (at 30 Amperes Inrush) of 10 Volts.
Question: What is the Weight of the IC660BBS102?
Answer: The Weight of the Allen Bradley-Rockwell Automation IC660BBS102 is 4 pounds (1.8 kilograms).
Para obtener información adicional sobre IC660BBS102 consulte la hoja de datos o el manual. También consulte el manual en PDF para ver todos los diagramas de cableado, compatibilidad, resolución de problemas, especificaciones, instrucciones de instalación y accesorios (como baterías, bloques de terminales o cables) relacionados conIC660BBS102.
Parte de revisión # | También conocido como | Disponibilidad |
---|---|---|
IC660BBS102K | IC660BBS102 Series K, Rev K | Solicitar presupuesto |
IC660BBS102L | IC660BBS102 Series L, Rev L | Solicitar presupuesto |
IC660BBS102M | IC660BBS102 Series M, Rev M | Solicitar presupuesto |
IC660BBS102P | IC660BBS102 Series P, Rev P | Solicitar presupuesto |
IC660BBS102R | IC660BBS102 Series R, Rev R | Solicitar presupuesto |
IC660BBS102-R1 | IC660BBS102 Series R1, Rev R1 | Solicitar presupuesto |
Errores ortográficos comunes:
Automation Stop vende excedentes de productos usados. Automation Stop no es un distribuidor, afiliado o representante autorizado de las marcas que comercializamos. Productos vendidos por Automation Stop ven con Automation Stop’s 1 año de garantía y no vienen con la garantía del fabricante original. Las marcas comerciales designadas, los nombres comerciales y las marcas que aparecen en este documento son propiedad de sus respectivos dueños. Este sitio web no está sancionado ni aprobado por ningún fabricante o nombre comercial mencionado.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.