The GE Fanuc Emerson IC694MDL340 is an output module for the Rx3i PACsystem that includes sixteen (16) discrete output points which support a voltage rating range from 85 Volts AC to 132 Volts AC at a frequency of 50/60 Hertz and an output current of 0.5 Amperes per point and 3 Amperes per group. The IC694MDL340 outputs are grouped into two (2) well-isolated groups of eight (8) outputs with a separate power terminal for each group (Q1 - Q8 and Q9 – Q16) which are labeled with green LED indicators to show the on/off status of outputs. The IC694MDL340 includes two three-Ampere fuses to prevent and protect groups from high power surges. The IC694MDL340 has a red LED indicator on the faceplate labelled “F” which can be turned when one of the fuses blows. The IC694MDL340 contains two (2) red bands on the front side to warn and indicate that it is a high-voltage module.

The IC694MDL340 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 Volts between logic and field sides and 250 Volts between groups. The IC694MDL340 can be easily mounted in any input or output slots of the RX3i system. The IC694MDL340 can be employed in many industrial applications such as solenoids, motor starters, and inductive loads by offering a high level of inrush current. The IC694MDL340 can be electrically supplied by an AC power supply. This module draws a current rating of 315 milliamperes at a voltage rating of +5 Volts DC on the backplane with all outputs set to the ON status. The IC694MDL340 delivers an output voltage range of 85 Volts AC to 132 Volts AC. The IC694MDL340 contains an RC snubber in each output group to suppress noise from the power line. The IC694MDL340 weighs approximately 520 grams (1.15 pounds) while shipping.

The IC694MDL340 Output Module made by GE Fanuc is rated at 120 Volts AC, has a 0.5 Amps per point output current rating, a 20 Amps per cycle inrush current, and an output voltage series of 85 to 132 Volts AC at a frequency of 50 to 60 Hertz. The IC694MDL340 Output Module features 16 output points that are segregated into two eight-point groupings, each has its own distinctive commonality. Every group can be applied to a different phase of the alternating current supply, or they can all be applied to the same phase of the alternating current supply. Each set of output points has an RC snubber that protects the outputs from noise generated by power line transients.
 The GE Fanuc IC694MDL340 Output Module features a high inrush current, which enables it to manage a broad diversity of incandescent and inductive loads. This Unit may run loads connected to outputs only when powered by a user-supplied AC power source. The GE Fanuc IC694MDL340 Output Module from the RX3i PacSystem family operates between the temperatures of 32 and 140 degrees Fahrenheit (0 and 60 degrees Celsius) and is capable of being temperatures ranging from -40 to 185 degrees Fahrenheit are recommended for storage. The Module may operate at non-condensing relative humidity levels ranging from 5% to 95%. Additionally, it has a vibration rating of 10 to 57 Hertz with a max displacement of 0.0524 millimeters (0.006 inches). Additionally, this module has a shock rating of 15 G for 11 milliseconds.