GE / IP FANUC Series 90/30 En stock
Fabricante: | Emerson - GE Fanuc |
tipo de producto: | Automation Product |
Número de pieza: | IC695CBL003 |
Serie: | RX3i PacSystem |
Descripción:
El GE Fanuc IC695CBL003 es un cable. La longitud de este cable es de 0,6 metros/24 pulgadas . Se utiliza principalmente para establecer la conexión entre las CPU y los paquetes de energía. Pertenece a la serie RX3i PACSystems. Tiene las siguientes clasificaciones de voltaje: 120/240 voltios CC, 125 voltios CC y 24 voltios CC. Está diseñado para usarse entre 0 y 60 grados Celsius, o entre 32 y 140 grados Fahrenheit.
Características clave:
Automation Stop NO es un distribuidor autorizado de este fabricante y, por lo tanto, no se aplica la garantía del fabricante. El producto viene con Automation Stop's 1 año de garantía.
Aceptamos tarjetas de crédito de los principales proveedores, así como PayPal.
Ofrecemos envíos a todo el mundo con UPS y DHL.
Estamos orgullosos de ofrecer una garantía de parada de automatización de un año en la mayoría de los productos.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.
The GE Fanuc IC695CBL003 is a replacement cable. The IC695CBL003 replacement cable is primarily used to form a connection between the CPU and an optional energy pack. The cable comes in full compliance with the RoHS standards. It is designed and manufactured by GE Fanuc. This particular connector cable is meant to be used with the RX3i PACSytems series. The length of this connector cable is 0.6 meters (24 inches). This replacement cable comes with a built-in connector. The IC695CBL003 connector cable is perfectly compatible with the RX3i PACSystems series devices from GE Fanuc. The voltage rating on the GE Fanuc IC695CBL003 replacement cable is 120 to 240 volts direct current, 125 volts direct current, or 24 volts direct current. The optimal operating temperature on this module is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The cable also comes with a protective coating. However, it requires both a ring terminal and a spade terminal for securing it to the ground. The GE Fanuc IC695CBL003 cable can be installed on a standard DIN rail. Users have access to the LED indicators for assessing the overall status of the module. The built-in LED indicators are used to indicate the module status, output, and input status. It is a very common phenomenon that during power outages and electricity disruptions, these modules fail to retain data. However, this particular module comes with data loss protection. Users also have the option of using the additional backup power pack that comes with the package.
There is a standard connector with the IC695CBL003 cable. Just like any other cable in this line, this cable is primarily used to establish a connection between an energy pack (optional), and a CPU. The length of this cable is twenty-four (24) inches, or the equivalent of 0.6 meters. The cable comes in compliance for the RoHS standards. Manufactured and designed by the GE Fanuc company, this connector cable is designed to be used particularly with the GE Fanuc RX3i PACSytems series.
Part number IC695CBL003 has an one hundred and twenty (120) to two hundred and forty (240) volts direct current (DC) voltage rating, as well as a twenty-four (24) volts direct current and one hundred and twenty-five (125) volts direct current voltage rating. For this cable made by GE Fanuc, zero (0) to sixty (60) degrees Celsius, or thirty-two (32) to one hundred and forty (140) degrees Fahrenheit, is the optimal temperature that this cable should be operated in. Unlike other modules from this line, the IC695CBL003 connector cable is completely compatible with the RX3i PACSystems series devices from GE Fanuc. It comes with a protective coating. However, it requires both a spade terminal and a ring terminal for connecting the wiring down to the ground. The built-in LED indicators are used to indicate the module status, output, and input status.The GE Fanuc IC695CBL003 cable can be installed on the standard DIN Rail.
There is an additional backup battery with the GE Fanuc IC695CBL003 cable. It helps avoid data loss due to power interruptions, and power outages. In order to avoid unforeseen disruptions, this GE Fanuc cable can conduct self-diagnostic tests.
Pregunta: ¿Automation Stop ofrece reparaciones en el IC695CBL003?
Respuesta: Si. Ofrecemos reparaciones para el IC695CBL003 y viene con nuestra garantía de parada de automatización de 1 año.
Pregunta: ¿Qué tipo de garantía viene con Emerson - GE Fanuc e IC695CBL003?
Respuesta: Si compra el IC695CBL003 a través de Automationstop.com, viene con nuestra garantía de 1 año y ninguna otra garantía.
Pregunta: ¿Puedo comprar el IC695CBL003 en línea ?
Respuesta: si Automation Stop vende el IC695CBL003 en línea y puede consultar la cantidad y el estado disponibles arriba.
Pregunta: ¿Cuál es el fabricante del IC695CBL003?
Respuesta: El IC695CBL003 está fabricado por Emerson-GE Fanuc .
Para obtener información adicional sobre IC695CBL003 consulte la hoja de datos o el manual. También consulte el manual en PDF para ver todos los diagramas de cableado, compatibilidad, resolución de problemas, especificaciones, instrucciones de instalación y accesorios (como baterías, bloques de terminales o cables) relacionados conIC695CBL003.
Parte de revisión # | También conocido como | Disponibilidad |
---|---|---|
IC695CBL003A | IC695CBL003 Series A, Rev A | Solicitar presupuesto |
IC695CBL003B | IC695CBL003 Series B, Rev B | Solicitar presupuesto |
Errores ortográficos comunes:
Automation Stop vende excedentes de productos usados. Automation Stop no es un distribuidor, afiliado o representante autorizado de las marcas que comercializamos. Productos vendidos por Automation Stop ven con Automation Stop’s 1 año de garantía y no vienen con la garantía del fabricante original. Las marcas comerciales designadas, los nombres comerciales y las marcas que aparecen en este documento son propiedad de sus respectivos dueños. Este sitio web no está sancionado ni aprobado por ningún fabricante o nombre comercial mencionado.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.