IC695CPE330

The GE Fanuc Emerson IC695CPE330 is a CPU that can be employed for Rx3i PacSystem. The CPU is employed to achieve real-time monitoring of machines and processes. The device includes 64 megabytes of storage and 32-kilo I/O points. This CPU contains a USB interface 2.0 type A to send and save applications. The IC695CPE330 includes eleven LED indicators on the faceplate to show the current CPU status. The device includes two embedded Ethernet port that supports DeviceNet, Modbus RTU/TCP, PROFINET, and PROFIBUS connections and includes two RJ-45 Ethernet ports that senses automatically the data rate either 10 megabits per second or 100 megabits per second, half or full-duplex and wiring arrangement either crossover or straight link. The device requires a current of 625 milliamperes without the energy pack and 750 milliamperes with the energy pack at a voltage of 24 volts DC.

The IC695CPE330 supports 512 program blocks with 128 kilobytes for each. This device has a dual-core processor with a data speed clock of 1.6 gigahertz. The CPU supports configurable program memory and data. The IC695CPE330 exchanges data with the programmer, I/O points, and modules via Ethernet ports. This CPU can be programmed using ladder, ST, FBD, and C programming languages. This device has an energy pack that can store sufficient electrical power to ensure the workability of CPU and memory circuits for a short time when the input power is disconnected or the battery is removed. The IC695CPE330 weighs approximately 1.29 kilograms (2.8 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

The GE Fanuc/Emerson Automation IC695CPE330 comes with LAN 2 connection switches. Using the PROFINET controllers, Genius I/O and Ethernet (EGD) users are able to utilize hot-standby configuration. The operating temperature rating on this module is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). RJ-45, 10/100 Mbps/1 Gbps Ethernet ports are included with this PACSystems RX3i controller. For communication, this module comes with compatibility with the rack-mounted PROFINET controller modules. Users have the option of using certain accessories with this module such as the IC695ACC402 energy pack, the IC695ACC412 capacitor pack, and the IC695CBL002 connecting cables. The front panel of the module accommodates pushbuttons and a three-position run mode. All these features make it easy to monitor and operate this PACSystems RX3i controller. This module must be installed inside the rack mounted RX3i PLC system. The GE Fanuc/Emerson Automation IC695CPE330 is ideal for multi-tier communication. Using the OPC UA, this CPU module can be integrated with other third-party devices. The GE Fanuc/Emerson Automation IC695CPE330 PACSystems RX3i controller comes with support for communication via the PROFINET Controller modules. The module's enabled PROFINET controller gives operators support for up to 32 I/O devices with an update rate of between 1 and 512 milliseconds. If there 16 or fewer devices, an update rate of 8 milliseconds is possible. The update rate increases to 16 milliseconds when there are more than 16 devices configured. The IC695CPE330 CPU also supports symbolic variables, auto-located. These variables are able to use any amount of user memory. 

There are two LAN connection switches on the GE Fanuc IC695CPE330 module. Due to the PROFINET controllers, both the Genius IO, & Ethernet (EGD) users can use the hot-standby configuration. Zero to sixty degrees Celsius is the optimal temperature rating during operation on this module. With this PACSystem RX3i controller, users get 10/100/1000 Mbps, RJ-45 Ethernet ports. For communication, this module supports the rack-mounted controller modules from PROFINET. Numerous accessories are able to be used with this device. Such accessories include the IC695ACC402 energy pack, IC695CBL002 connecting cables, and the IC695ACC412 capacitor pack. This product is equipped with a front plate that has six (6) status indicators attached to it. There are pushbuttons, and 3-position run mode on the front plate of this module. All these features make it easy to operate and monitor this RX3i PACSystem controller. This module must be installed inside the rack-mounted RX3i PLC system. It comes with support for analog I/O points, and 32K discrete. 

For multi-level communication, the GE Fanuc IC695CPE330 is an ideal module. Using the OPC UA, this module can be integrated with other third-party devices. Using the generic thumb drive, users can upload, and download programs via the USB 2.0 master port. It supports usage with RX3i control system. When it comes to programming languages, the GE Fanuc IC695CPE330 supports function block diagram (FBD), structured text (ST), C, and ladder diagram (LD). It can establish communication with third-party applications such as the OPC UA. This connection needs to be established over the Ethernet / IP connection.