GE / IP FANUC Series 90/30 En stock
Fabricante: | Emerson - GE Fanuc |
tipo de producto: | Automation Product |
Número de pieza: | IC200ERM001 |
Serie: | Versamax |
UPC: | 63968053068 |
Descripción:
El GE Fanuc Emerson IC200ERM001 es un módulo receptor de expansión. Este módulo aislado puede manejar ocho ( 8 ) dispositivos de E/S y de propósito especial. El IC200ERM001 pesa aproximadamente 230 gramos ( 0,5 libras) mientras se envía.
Automation Stop NO es un distribuidor autorizado de este fabricante y, por lo tanto, no se aplica la garantía del fabricante. El producto viene con Automation Stop's 1 año de garantía.
Aceptamos tarjetas de crédito de los principales proveedores, así como PayPal.
Ofrecemos envíos a todo el mundo con UPS y DHL.
Estamos orgullosos de ofrecer una garantía de parada de automatización de un año en la mayoría de los productos.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.
The GE Fanuc Emerson IC200ERM001 is an expansion receiver module. This isolated module can handle eight (8) special-purpose and I/O devices. The device can interface a specific expansion rack to an I/O bus in either an NIU or a PLC system. The IC200ERM001 includes a power supply that is already installed to offer the operating electrical power for the expansion rack devices. This module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 500 volts DC. This device has three LED indicators to show the power, expansion bus, and rack status. The module draws a current of 430 milliamperes at a backplane voltage of 5 volts DC and 20 milliamperes at a backplane voltage of 3.3 volts DC.
The IC200ERM001 includes two female D-shell ports with 26 pins. The first port on the top supports the expansion transmitter cable. The second port on the bottom is employed either to daisy-chain the I/O bus cable to the expansion rack or to improve the terminator plug attachment on the last rack. This VersaMax module can be easily mounted on the DIN rail at the far left slot of the expansion rack. The device supports a cable length of either 250 meters (820 feet) with a data rate of 1 megabit per second or 50 meters (164 feet) with a data rate of 250 kilobits per second. The unit includes a rotary switch that is employed to access the module door. The IC200ERM001 weighs approximately 230 grams (0.5 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Marca | GE Automation Fanuc / Emerson Automation |
Serie | VersaMax |
Número de pieza | IC200ERM001 |
Descripción | Módulo receptor de expansión aislado |
Voltaje máximo de salida del backplane | 5 voltios CC |
Voltaje mínimo de salida del backplane | 3,3 voltios CC |
Consumo de corriente del backplane a 5 VDC | 430mA |
Consumo de corriente del backplane a 3.3 VDC | 20mA |
Numero de LEDs | 3 |
Indicadores LED | LED PWR, LED EXP RX y ESCANEO |
Longitud máxima del cable | 250 metros (si está configurado para una velocidad de datos más alta), 50 metros (distancia predeterminada) |
Tasa de datos efectiva | 1 Mbits/seg (configurable si es menos de 250 metros), 250 Kbits/seg (velocidad de datos predeterminada) |
Aislamiento eléctrico | Comunicaciones diferenciales aisladas de 500 VCC |
Puertos D-Shell | 2 puertos hembra con 26 pines |
Interruptor de selección de rack de expansión | interruptor giratorio |
Fuente de alimentación | Instalado |
Peso | 230 g (0,5 libras) |
Pregunta: ¿Automation Stop ofrece reparaciones en el IC200ERM001?
Respuesta: Si. Ofrecemos reparaciones para el IC200ERM001 y viene con nuestra garantía de parada de automatización de 1 año.
Pregunta: ¿Qué tipo de garantía viene con Emerson - GE Fanuc e IC200ERM001?
Respuesta: Si compra el IC200ERM001 a través de Automationstop.com, viene con nuestra garantía de 1 año y ninguna otra garantía.
Pregunta: ¿Puedo comprar el IC200ERM001 en línea ?
Respuesta: si Automation Stop vende el IC200ERM001 en línea y puede consultar la cantidad y el estado disponibles arriba.
Pregunta: ¿Cuál es el fabricante del IC200ERM001?
Respuesta: El IC200ERM001 está fabricado por Emerson-GE Fanuc .
Question: What is the Backplane current consumption at 3.3 VDC of the IC200ERM001?
Answer: The Backplane current consumption at 3.3 VDC of the Allen Bradley-Rockwell Automation IC200ERM001 is 20 mA.
Question: What is the Backplane current consumption at 5 VDC of the IC200ERM001?
Answer: The Backplane current consumption at 5 VDC of the Allen-Bradley IC200ERM001 is 430 mA.
Question: What Brand does the Allen Bradley Automation IC200ERM001 have?
Answer: The Allen Bradley Automation IC200ERM001 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What D-Shell ports does the IC200ERM001 have?
Answer: The D-Shell ports of the Allen-Bradley IC200ERM001 is 2 Female ports with 26 pins.
Question: What Description is included with the IC200ERM001?
Answer: The Allen Bradley Automation IC200ERM001 has a Isolated expansion receiver Module Description.
Question: What is the Effective data rate of the Rockwell-Automation IC200ERM001?
Answer: The Effective data rate of the Rockwell-Automation IC200ERM001 is 1 Mbits/sec (configurable if less than 250 meters), 250 Kbits/sec (default data rate).
Question: What is the Electrical isolation of the IC200ERM001?
Answer: The Electrical isolation of the Allen Bradley Automation IC200ERM001 is 500 VDC isolated differential communications.
Question: What Expansion rack selection switch does the Allen Bradley IC200ERM001 have?
Answer: The IC200ERM001 has a Rotary switch Expansion rack selection switch.
Question: What LED indicators are included with the IC200ERM001?
Answer: The Allen Bradley Automation IC200ERM001 has LED indicators PWR LED, EXP RX LED, and SCAN.
Question: What is the Maximum backplane output voltage of the IC200ERM001?
Answer: The Maximum backplane output voltage of the Rockwell-Automation IC200ERM001 is 5 volts DC (direct current).
Question: What is the Maximum cable length of the IC200ERM001?
Answer: The IC200ERM001 has a Maximum cable length of 250 meters (if configured for higher data rate), 50 meters (default distance).
Question: What Minimum backplane output voltage does the Allen Bradley/Rockwell Automation IC200ERM001 have?
Answer: The IC200ERM001 has a Minimum backplane output voltage of 3.3 volts direct current (DC).
Question: What is the Number of LEDs of the IC200ERM001?
Answer: The Number of LEDs of the IC200ERM001 is 3.
Question: What is the component Number of the Rockwell-Automation IC200ERM001?
Answer: The unit Number of the Rockwell-Automation IC200ERM001 is IC200ERM001.
Question: What power supply component is included with the Allen-Bradley IC200ERM001?
Answer: The IC200ERM001 has a Installed power supply unit.
Question: What is the Weight of the IC200ERM001?
Answer: The Allen-Bradley IC200ERM001 has a Weight of 230 g (0.5 lb).
Para obtener información adicional sobre IC200ERM001 consulte la hoja de datos o el manual. También consulte el manual en PDF para ver todos los diagramas de cableado, compatibilidad, resolución de problemas, especificaciones, instrucciones de instalación y accesorios (como baterías, bloques de terminales o cables) relacionados conIC200ERM001.
Parte de revisión # | También conocido como | Disponibilidad |
---|---|---|
IC200ERM001A | IC200ERM001 Series A, Rev A | Solicitar presupuesto |
IC200ERM001C | IC200ERM001 Series C, Rev C | Solicitar presupuesto |
IC200ERM001J | IC200ERM001 Series J, Rev J | Solicitar presupuesto |
Errores ortográficos comunes:
Automation Stop vende excedentes de productos usados. Automation Stop no es un distribuidor, afiliado o representante autorizado de las marcas que comercializamos. Productos vendidos por Automation Stop ven con Automation Stop’s 1 año de garantía y no vienen con la garantía del fabricante original. Las marcas comerciales designadas, los nombres comerciales y las marcas que aparecen en este documento son propiedad de sus respectivos dueños. Este sitio web no está sancionado ni aprobado por ningún fabricante o nombre comercial mencionado.
Rockwell Descargo de responsabilidad: El producto se utiliza excedente. Automation Stop no es un distribuidor autorizado de excedentes ni un afiliado del fabricante de este producto. El producto puede tener códigos de fecha más antiguos o ser una serie más antigua que la disponible directamente de fábrica o distribuidores autorizados. Porque Automation Stop no es un distribuidor autorizado de este producto, no se aplica la garantía del fabricante original. Si bien muchos productos de PLC de Allen-Bradley ya tienen firmware instalado, DO Supply no garantiza si un producto de PLC tendrá o no firmware y, si tiene firmware, si el firmware tiene el nivel de revisión que necesita para su solicitud. Automation Stop tampoco garantiza su capacidad o derecho para descargar u obtener firmware para el producto de Rockwell, sus distribuidores o cualquier otra fuente. Automation Stop tampoco garantiza su derecho a instalar dicho firmware en el producto. Automation Stop no obtendrá ni suministrará firmware en su nombre. Es su obligación cumplir con los términos de cualquier Acuerdo de licencia de usuario final o documento similar relacionado con la obtención o instalación de firmware.