GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 13106A6513 |
Series: | 1310 |
Description:
The 13106A6513 belongs to the group of photoelectric sensors by Eaton Cutler-Hammer. These are used for different sensing applications. This sensor belongs to the Comet series. It has an infrared sensing beam for detection. This sensor has a frequency rating of 50 to 60 Hz. It uses diffuse reflective sensing method. The sensing range is 8 inches. The operating voltage of this device is rated at 15 to 30 volts DC and 20 to 264 volts AC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 13106A6513 is a photoelectric sensor from the Comet series by Eaton Cutler-Hammer. These sensors are used in different types of sensing applications. These sensors are further categorized as diffuse reflective sensors. They support both AC and DC power. The maximum range for sensing is 8 inches and the beam type is infrared. The operating voltage for this sensor is 15 to 30 volts DC and 20 to 264 volts AC. It supports VMOS and NPN type output. Maximum load current that it can bear is 0.5 amperes. They follow the NEMA 1, NEMA 2, NEMA 3, NEMA 4, NEMA 4X, NEMA 6, NEMA 12 and NEMA 13 environmental ratings. The physical dimensions of this device measure 2 inches x 6 inches x 5 inches. The current rating is 300 milliamperes. There are LED (light emitting diode) indicators for showing the output status. The operating temperature is from -40 degrees Celsius to 70 degrees Celsius. There is latching S/C protection also available. The frequency rating for this module is between 50 to 60 hertz. The noted response time is 10 milliseconds. There are more than 250 different models available. These sensors have different operation modes. They can be easily mounted because of their flat structure. These sensors are UL, CUL and CE approved. These sensors are shock and vibration resistant because of the strong Polyurethane Housing. Crosstalk from other sensors in the vicinity is not observed in the case because of adaptable modulation. These should be installed and operated by trained professionals only.
Question: Does Automation Stop offer repairs on the 13106A6513?
Answer: Yes. We offer repairs for the 13106A6513 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 13106A6513?
Answer: If you buy the 13106A6513 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 13106A6513 online?
Answer: Yes. Automation Stop sells the 13106A6513 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 13106A6513?
Answer: The 13106A6513 is made by Allen Bradley - Drives.
Question: What VAC (voltage alternating current) is included with the 13106A6513?
Answer: The Allen Bradley - Drives 13106A6513 includes a voltage alternating current (VAC) of 20-264.
For additional information about 13106A6513 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 13106A6513.
Revision Part # | Also Known As | Availability |
---|---|---|
13106A6513/A | 13106A6513 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.