GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1321-M180 |
Series: | 1321 |
Description:
The Allen-Bradley 1321-M180 is a Common Mode Choke. This unit provides security against interference to other electrical devices such as PLCs and sensors. This device supports a voltage range from 230 Volts AC to 600 Volts AC. The 1321-M180 weighs approximately 2.22 Kilograms (4.9 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1321-M180 is a Common Mode Choke. This unit provides security against interference to other electrical devices such as PLCs and sensors. This device supports a voltage range from 230 Volts AC to 600 Volts AC at a frequency range from 50 to 60 Hertz. The unit offers a maximum switching frequency of 20 Kilohertz. The 1321-M180 provides a dielectric strength of 3000 Volts AC. The device supports a non-condensing relative humidity range from 5% to 95% and a vibration frequency range from 5 to 55 Hertz. This Common Mode Choke can operate at an altitude of up to 1000 meters (3281 feet) without deterioration. The device has an operating specification for the mechanical shock level of 2 g.
The 1321-M180 has a current rating of 180 Amperes. The common-mode choke can be stored in a safe environment that shouldn’t be full of condensation or corrosion at a temperature from -40 to 65 degrees Celsius (-40 to 149 degrees Fahrenheit). The 1321-M180 can be employed with PowerFlex 70/700, 1336 PLUS II, and 1336 IMPACT system drives. This unit offers a power rating from 15 Kilowatts to 112 Kilowatts and from 20 horsepower to 150 horsepower. This Common Mode Choke minimizes the PWM frequency to minimize the risk of common-mode noise interference. The 1321-M180 can operate at a temperature range of zero (0) to 55 degrees Celsius (32 to 131 degrees Fahrenheit) for applications and weighs approximately 2.22 Kilograms (4.9 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1321 |
Part Number | 1321-M180 |
Description | Common Mode Choke |
Product Type | Power Component |
Current Rating | 180 Amperes |
Choke Type | Open-Style, 180 Amperes |
Compatiblity | PowerFlex 70/700, 1336 PLUS II, 1336 IMPACT |
Voltage Range | 230 - 600 Volts |
Power Rating | 15 - 112 Kilowatts (20 - 150 Horsepower) |
Weight | 2.22 Kilograms (4.9 pounds) |
Question: Does Automation Stop offer repairs on the 1321-M180?
Answer: Yes. We offer repairs for the 1321-M180 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1321-M180?
Answer: If you buy the 1321-M180 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1321-M180 online?
Answer: Yes. Automation Stop sells the 1321-M180 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1321-M180?
Answer: The 1321-M180 is made by Allen Bradley - Drives.
Question: What Brand does the Allen Bradley Automation 1321-M180 have?
Answer: The 1321-M180 has a Allen Bradley / Rockwell Automation Brand.
Question: What is the Choke Type of the 1321-M180?
Answer: The Choke Type of the 1321-M180 is Open-Style, 180 Amperes.
Question: What Compatiblity does the Allen-Bradley 1321-M180 have?
Answer: The 1321-M180 has a Compatiblity of PowerFlex 70/700, 1336 PLUS II, 1336 IMPACT.
Question: What is the Current Rating of the Rockwell Automation 1321-M180?
Answer: The Rockwell Automation 1321-M180 has a Current Rating of 180 Amperes.
Question: What Description is included with the 1321-M180?
Answer: The Allen Bradley/Rockwell Automation 1321-M180 has a Common Mode Choke Description.
Question: What unit Number does the Allen Bradley-Rockwell Automation 1321-M180 have?
Answer: The component Number of the Allen Bradley-Rockwell Automation 1321-M180 is 1321-M180.
Question: What Power Rating does the 1321-M180 have?
Answer: The Power Rating of the Rockwell-Automation 1321-M180 is 15 - 112 Kilowatts (20 - 150 Horsepower).
Question: What Product Type does the Rockwell-Automation 1321-M180 have?
Answer: The Rockwell-Automation 1321-M180 has a Power Component Product Type.
Question: What Voltage Range does the Allen-Bradley 1321-M180 have?
Answer: The Allen-Bradley 1321-M180 has a Voltage Range of 230 - 600 Volts.
Question: What is the Weight of the 1321-M180?
Answer: The 1321-M180 has a Weight of 2.22 Kilograms (4.9 pounds).
For additional information about 1321-M180 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1321-M180.
Revision Part # | Also Known As | Availability |
---|---|---|
1321-M180/A | 1321-M180 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.