GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2090-CFBM7DF-CEAA15 |
Series: | 2090 |
Description:
The 2090-CFBM7DF-CEAA15, which was manufactured by Allen-Bradley, is a SpeedTEC standard power and feedback cable. This power and feedback cable is equipped with a threaded DIN connection, a connector category motor-end, a flying-lead drive-end, a sin/cos high-resolution/resolver encoder category, and a standard connector (non-flex). The cable has a total length of 15 meters. This device complies with NFPA-79, and its low capacitance design allows it to optimize system power density.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2090-CFBM7DF-CEAA15 is a Speedtec Standard Feedback Cable manufactured by Allen-Bradley. There is a standard feedback cable type, which has a connection type of SpeedTec DIN connector with a drive-end flying lead at the motor end and a connector type of female (bus) straight at the drive end. It measures 15 meters in length and is colored green. This 2090-CFBM7DF-CEAA15 module is for power and is a feedback cable. It is a shielded cable with a voltage rating of 600 volts, and it is used in electrical installations. This cable complies with the KC standard. The cable choices offered include sin/cos high-resolution/resolver encoder type, and it is from the MP Series.
The 2090-CFBM7DF-CEAA15 is equipped with drive-end flying-leads (DF), high-resolution, and battery backup or incremental applications, among other characteristics (CB). Machine manufacturers have entire control over the cable needs of their machines because of innovative features, configuration choices, and accessories available to them. The feedback cables with the CE designation, such as 2090-CFBM7DF-CEAA15, are designed for high encoder or resolver operations and have fewer connections than feedback connections with the CD designation. The CD designation indicates that the feedback cable is intended for low-resolution encoder devices or resolver operations. Machine OEMs and end-users may standard their machines by adopting 2090 sequences motor wires with SpeedTec DIN connectors. As a result, they may standardize on a single motor cable family. These Allen-Bradley / Rockwell Automation cables, with unsurpassed industry qualities and standards compliance, are designed for maximum performance with Allen-Bradley servo motors, servo type motors, and linear actuation, among other items.
MPN | 2090-CFBM7DF-CEAA15 |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | Kinetix Motion Accessory |
Product Type | Cable |
Cable Type | Motor feedback only |
Motor-end Connector Type | SpeedTec DIN connector |
Drive-end Connector Type | Drive-end, flying-leads |
Wire Gauge Size | BLANK |
Encoder Type | SIN/COS High-resolution/Resolver |
Cable Material Type | Standard, non-flex |
Cable Length | 15...90 m 49.5...295 ft |
Question: Does Automation Stop offer repairs on the 2090-CFBM7DF-CEAA15?
Answer: Yes. We offer repairs for the 2090-CFBM7DF-CEAA15 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2090-CFBM7DF-CEAA15?
Answer: If you buy the 2090-CFBM7DF-CEAA15 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2090-CFBM7DF-CEAA15 online?
Answer: Yes. Automation Stop sells the 2090-CFBM7DF-CEAA15 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2090-CFBM7DF-CEAA15?
Answer: The 2090-CFBM7DF-CEAA15 is made by Allen Bradley - Drives.
Question: What Cable Length does the Allen Bradley-Rockwell Automation 2090-CFBM7DF-CEAA15 have?
Answer: The 2090-CFBM7DF-CEAA15 has a Cable Length of 15...90 m 49.5...295 ft.
Question: What Cable Material Type is included with the 2090-CFBM7DF-CEAA15?
Answer: The 2090-CFBM7DF-CEAA15 has a Standard, non-flex Cable Material Type.
Question: What Cable Type does the Allen Bradley-Rockwell Automation 2090-CFBM7DF-CEAA15 have?
Answer: The Allen Bradley-Rockwell Automation 2090-CFBM7DF-CEAA15 has a Motor feedback only Cable Type.
Question: What Drive-end Connector Type does the Rockwell-Automation 2090-CFBM7DF-CEAA15 have?
Answer: The Rockwell-Automation 2090-CFBM7DF-CEAA15 has a Drive-end, flying-leads Drive-end Connector Type.
Question: What Encoder Type is included with the 2090-CFBM7DF-CEAA15?
Answer: The Allen Bradley 2090-CFBM7DF-CEAA15 has a SIN/COS High-resolution/Resolver Encoder Type.
Question: What Motor-end Connector Type is included with the Rockwell-Automation 2090-CFBM7DF-CEAA15?
Answer: The 2090-CFBM7DF-CEAA15 has a SpeedTec DIN connector Motor-end Connector Type.
Question: What Product Type does the 2090-CFBM7DF-CEAA15 have?
Answer: The Rockwell Automation 2090-CFBM7DF-CEAA15 has a Cable Product Type.
Question: What Wire Gauge Size does the 2090-CFBM7DF-CEAA15 have?
Answer: The Allen Bradley/Rockwell Automation 2090-CFBM7DF-CEAA15 has a BLANK Wire Gauge Size.
For additional information about 2090-CFBM7DF-CEAA15 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-CFBM7DF-CEAA15.
Revision Part # | Also Known As | Availability |
---|---|---|
2090-CFBM7DF-CEAA15/A | 2090-CFBM7DF-CEAA15 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.