GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2097-V31PR0

✓ In Stock

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2097-V31PR0
Series: Kinetix 300

Description:

Part number 2097-V31PR0 is a Kinetix 300 Ethernet/IP indexing servo drive. Designed and manufactured by Allen Bradley, this drive operates via a single-phase power supply with a voltage rating of 120 to 240 volts. This device has a continuous output current rated at 2.8 amperes. This drive requires a minimum clearance of 0.12 inches on both sides of it, as well as 1.0 inch above and below it, to allow for proper ventilation.


Key Features:

  • has 9.37 x 7.29 x 2.68 in (238 x 185 x 68.0 mm) dimensions
  • utilizes a 32-104 f (0-40 c) operating temperature

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$2,182.00

Available: 83

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$1,016.00

Available: 3

What is Refurbished

Your order will ship by . Need it faster?

Looking for a 2097-V31PR0? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2097-V31PR0 is a Kinetix 300 Ethernet/IP indexing servo drive. This drive features a single Ethernet/IP interface, allowing it to connect to existing Ethernet/IP networks and simplify integration. This communication interface enables integration with everything from machine controls to display systems. The drive operates effectively on a single phase with an input voltage in the range of 75 to 132 volts AC (alternating current). The drive can act as a voltage doubler in dual voltage mode from 75 to 264 volts AC rms in a single-phase. In order to operate the drive under rated conditions, the drive can be operated with 120 to 240 volts AC with an input frequency of 46 to 63 hertz. The drive requires a minimum clearance of 0.12 inches on both sides of the drive, as well as 1.0 inch above and below the drive, to allow the drive to cool itself. Despite its small size, the 2097-V31PR0 servo drive provides reliable, high-speed communication and increases machine performance. For position control performance, this Kinetix 300 servo drive offers 5 different index types and 32 indexes. PTO, indexing, Ethernet/IP, and analog controlled control of actuators and servo motors are supported. The 2097-V31PR0 satisfies a variety of machine needs around the world thanks to its versatile control design. The 2097-V31PR0 servo drive has an integrated safe torque cut-off. This capability is critical to maintaining productivity while ensuring safety. Quick repairs and maintenance can be performed without shutting down the entire system. Typical responsibilities include setting up the machine, clearing paper jams, and cleaning it.

Technical Specifications

Type Servo Controller
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2097-V31PR0?

Answer: Yes. We offer repairs for the 2097-V31PR0 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2097-V31PR0?

Answer: If you buy the 2097-V31PR0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2097-V31PR0 online?

Answer: Yes. Automation Stop sells the 2097-V31PR0 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2097-V31PR0?

Answer: The 2097-V31PR0 is made by Allen Bradley - Drives.


Question: What type of product is the 2097-V31PR0?

Answer: The 2097-V31PR0 is part of the Kinetix 300 series.


Series information for 2097-V31PR0

For additional information about 2097-V31PR0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2097-V31PR0.

Revision Part # Also Known As Availability
2097-V31PR0/A 2097-V31PR0 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2097-V31PRO
  • 2097-V3IPR0
  • 2097-V3IPRO
  • 2O97-V31PR0
  • 2O97-V31PRO
  • 2O97-V3IPR0
  • 2O97-V3IPRO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP