GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-030 |
Series: | Ultra3000-5000 |
UPC: | 662453934426 |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, product number 2098-DSD-030 is a servo drive that belongs to the Ultra3000 series of products. This drive has an input voltage rated at 100 to 240 volts AC rms, single-phase at an input frequency of 47 to 63 hertz. The continuous output current of this device is 15 amperes from 0 to peak performance. The bus overvoltage rating of this device is 452 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2098-DSD-030 is an Ultra3000 servo drive that was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. The drive’s single-phase nominal input voltage is defined at 100 to 240 V rms at 47 to 63 Hz. It has a nominal input current of 28 A and an auxiliary input current of 0.5 A at 230 V AC rms. The drive’s continuous and peak output current rating (0-pk) is specified at 15/30 A. Its continuous and peak output current rms rating is 11/21 A. The drive’s wattage is specified at 3 kW. The drive has an internal shunt resistance of 35 ohms and a bus capacitance of 2820 μF. The resistor’s Shunt on and off ratings are 420 V DC, and the bus overvoltage is rated at 452 V DC. This Allen Bradley drive has physical dimensions that measure 91.44 millimeters x 360.68 millimeters x 227.08 millimeters, or 3.6 inches x 14.2 inches x 8.94 inches. This device has an approximate weight of 6.2 kilograms, or the equivalent of 13.6 pounds.
The 2098-DSD-030 servo drive is designed for operation in conjunction with high-performance rotary servo motors. It offers a DeviceNet interface. This drive does not provide network capability and has no indexing. The drive has an RS-232 serial interface that allows for RS-232, RS-485, and multi-drive communication, as well as point-to-point connection. The drive’s front panel is equipped with connectors for AC power, motor power, a motor power cable shield clamp, and a shunt resistor. The front panel also features a serial port connector, user I/O connector, and a female motor feedback connector.
Question: Does Automation Stop offer repairs on the 2098-DSD-030?
Answer: Yes. We offer repairs for the 2098-DSD-030 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-030?
Answer: If you buy the 2098-DSD-030 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-030 online?
Answer: Yes. Automation Stop sells the 2098-DSD-030 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-030?
Answer: The 2098-DSD-030 is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-030?
Answer: The 2098-DSD-030 is part of the Ultra3000-5000 series.
Question: What amperage is included with the Allen Bradley - Drives 2098-DSD-030?
Answer: The 2098-DSD-030 includes a amperage of 15.
Question: What amperage is included with the 2098-DSD-030?
Answer: The 2098-DSD-030 has a amperage of 30.
For additional information about 2098-DSD-030 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-030.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-030/A | 2098-DSD-030 Ser A, Series A, Rev A | Request a Quote |
2098-DSD-030/B | 2098-DSD-030 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.