GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-HV030X-DN |
Series: | Ultra3000-5000 |
UPC: | 662453959405 |
Description:
The Allen-Bradley 2098-DSD-HV030X-DN is a digital servo drive designed work at 460V AC, 3 phase. It can deliver continuous output power of four (4) horsepower and a continuous output current of seven (7) amps. The intermittent output current is fourteen (14) amps and the maximum inrush current is sixty-eight (68) amps. It is indexed with sixty-four (64) possible profiles and 4 modes of operation and supports serial and DeviceNet communications.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2098-DSD-HV030X-DN which was manufactured by the company known as Allen-Bradley, is a part of Ultra3000 series of Allen-Bradley servo drives. This product is designed to drive brushless servo motors in closed loop configuration. It uses the AC input voltage of 460 volts AC, 3 phase. This Allen-Bradley product has an output power of four (4) horsepower continuous and an output current of seven (7) amperes continuous. The maximum inrush current is sixty-eight 68 amps (0-peak). In order to cover the applications that needs point to point movements, the 2098-DSD-020X-DN features its indexing capability. The drive is indexed with 64 (sixty-four) possible profiles and 4 (four) modes of operation, as well as all of their parameters. Therefore, there is no need for PLC motion control interface because the drive is connected to DeviceNet network and the drive commands are received by DeviceNet interface. The drive itself has its own seven segment LED for status and error codes and other LED’s, such as normal, standby, fault, etc. can be monitored locally, but the advantage of remote control save the time and decrease the price for maintenance and required manpower. The temperature operating range is thirty-two to one hundred and thirty-one (32 to 131) degrees Fahrenheit and surrounding air temperature must not exceed one hundred and forty-nine (149) degrees Fahrenheit. The unit storage temperature rate is -40 to 158 degrees Fahrenheit and the relative humidity must remain within the range of 5% to 95%.
Question: Does Automation Stop offer repairs on the 2098-DSD-HV030X-DN?
Answer: Yes. We offer repairs for the 2098-DSD-HV030X-DN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV030X-DN?
Answer: If you buy the 2098-DSD-HV030X-DN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-HV030X-DN online?
Answer: Yes. Automation Stop sells the 2098-DSD-HV030X-DN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-HV030X-DN?
Answer: The 2098-DSD-HV030X-DN is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-HV030X-DN?
Answer: The 2098-DSD-HV030X-DN is part of the Ultra3000-5000 series.
For additional information about 2098-DSD-HV030X-DN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV030X-DN.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-HV030X-DN/A | 2098-DSD-HV030X-DN Ser A, Series A, Rev A | Request a Quote |
2098-DSD-HV030X-DN/B | 2098-DSD-HV030X-DN Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.