GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-IPD-030 |
Series: | Ultra3000-5000 |
UPC: | 662453983554 |
Description:
The Allen-Bradley 2098-IPD-030 is an Ultra5000 intelligent positioning drive. This drive requires an AC input to power correctly. The voltage of this input should be 100 to 240 volts rms, single-phase. The frequency of the input should be 47 to 63 hertz. It has a continuous output current of 15 amperes (0-pk) and an intermittent output current of 30 amperes (0-pk). This device weighs approximately 6.16 kg (kilograms), or 13.58 lbs (pounds).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 2098-IPD-030 is an intelligent positioning drive. Designed and produced by Allen-Bradley, this drive belongs to the Ultra5000 series product line. The 2098-IPD-030 requires an AC (alternating current) input to operate. The required voltage for this Allen-Bradley product to operate is 100 to 240 V rms with a single phase. The frequency of the input needs to be forty-seven (47) to sixty-three (63) hertz. Additionally, the current of the main AC input should be nominal twenty-eight (28) amperes rms and a max inrush at 230 volts AC input of fifty (50) amperes rms. The current of the auxiliary alternating current input is one (1.0) amperes rms nominal at 115 V alternating current input, 0.5 amperes rms nominal at 230 V alternating current input, forty-seven (47) amperes zero-peak at a max inrush of 115 V alternating current input, and ninety-five (95) amperes zero-peak at a max inrush of 230 V alternating current input.
The 2098-IPD-030 has a continuous output current and an intermittent output current of fifteen (15) amperes and thirty (30) amperes, respectively, with both at zero-peak. The internal shunt of this product is fifty (50) watts when it is powered continuously and 4.5 kilowatts when it is at peak power. The external shunt has a thirty (30) ohm minimum resistance, as well as a continuous power of 2.4 kilowatts and a peak power of 6 kilowatts. The Allen-Bradley 2098-IPD-030 roughly weighs 6.16 kilograms, or 13.58 pounds. The maximum power loss of this Ultra5000 drive is one hundred and fifty (150) watts and a dissipative shunt.
Question: Does Automation Stop offer repairs on the 2098-IPD-030?
Answer: Yes. We offer repairs for the 2098-IPD-030 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-IPD-030?
Answer: If you buy the 2098-IPD-030 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-IPD-030 online?
Answer: Yes. Automation Stop sells the 2098-IPD-030 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-IPD-030?
Answer: The 2098-IPD-030 is made by Allen Bradley - Drives.
Question: What type of product is the 2098-IPD-030?
Answer: The 2098-IPD-030 is part of the Ultra3000-5000 series.
Question: What amperage is included with the 2098-IPD-030?
Answer: The 2098-IPD-030 has a amperage of 15.
Question: What can I expect the amperage included with the 2098-IPD-030 to be?
Answer: The 2098-IPD-030 includes a amperage of 30.
For additional information about 2098-IPD-030 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-IPD-030.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-IPD-030/A | 2098-IPD-030 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.