GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD040F0AYNANC0 |
Series: | PowerFlex 70 |
Description:
A 22 kilowatt VFD powers this Allen Bradley 30 Hp drive and this, 20AD040F0AYNANC0 drive, is rated at 40 amps and has a D frame size. This adjustable frequency drive does not have a human interface; instead, it only has a blank cover and A flange mount IP 66 enclosure is included in the drive. In addition to the drive, this PowerFlex 70 has an improved card installed in it.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The is alternating current Drive hails from the PowerFlex 70 products, and it is used to manage PH 3 motors for induction in speed and torque command functions. This alternating current drive features a 480 volts alternating current operational voltage, a minus 10 percent minimum and plus 10 percent maximum voltage tolerance, and a forty-seven to sixty-three hertz frequency of the input. It also has a 0.98 watts rated power during operation and a 97.5 percent drive efficiency. it has normal-duty output ratings of 40A and 22kW (30HP) and heavy-duty output rates of 18.5kW (25 Hp). It features both heavy-duty and light-duty output ratings. The adjustable frequency drive features 570 volts and 280 volts alternating input overvoltage and undervoltage trips, as well as a microprocessor-controlled overtemperature trip at the heatsink and programmed overcurrent tripping with limits of 20% to 160 percent.
It utilizes a MOV in order to provide security for transient (line) of up to 6000 volts, with PH to PH and PH to ground security at the drive's output, a 15-millisecond power outage is not a problem for this drive to surf through at max load. The 20AD040F0AYNANC0 has a 110 percent ability, in case of max load surpassed, for sixty seconds, along with an ability of 150 percent, in case of max load surpassed, up until three seconds, as well as motor security and speed-sensitive responses. It has a temperature range that goes from 32 to 122 degrees Fahrenheit, with a range of humidity from Five to ninety-five percent, and minus 40 to 158 degrees Fahrenheit as its temperature of storage.
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 40 |
kW | 22 |
HP | 30 |
Frame | D |
Enclosure | Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use |
Interface Module | Blank Cover |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD040F0AYNANC0?
Answer: Yes. We offer repairs for the 20AD040F0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD040F0AYNANC0?
Answer: If you buy the 20AD040F0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD040F0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AD040F0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD040F0AYNANC0?
Answer: The 20AD040F0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD040F0AYNANC0?
Answer: The 20AD040F0AYNANC0 is part of the PowerFlex 70 series.
Question: What amperes does the 20AD040F0AYNANC0 have?
Answer: The Allen Bradley-Rockwell Automation 20AD040F0AYNANC0 has a amperes of 40.
Question: What Control does the Allen Bradley/Rockwell Automation 20AD040F0AYNANC0 have?
Answer: The 20AD040F0AYNANC0 has a Enhanced Control.
Question: What is the Enclosure of the 20AD040F0AYNANC0?
Answer: The Enclosure of the Allen Bradley 20AD040F0AYNANC0 is Flange Mount - Front Chassis = IP 20, NEMA/UL Type 1, Rear Heatsink = IP66, NEMA/UL Type 4X/12 for indoor/outdoor use.
Question: Does the 20AD040F0AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame does the 20AD040F0AYNANC0 have?
Answer: The 20AD040F0AYNANC0 has a D Frame.
Question: What is the HP of the 20AD040F0AYNANC0?
Answer: The HP of the 20AD040F0AYNANC0 is 30.
Question: What Interface Module is included with the Allen Bradley/Rockwell Automation 20AD040F0AYNANC0?
Answer: The 20AD040F0AYNANC0 has a Blank Cover Interface Module.
Question: What is the kW of the Rockwell-Automation 20AD040F0AYNANC0?
Answer: The kW of the Rockwell-Automation 20AD040F0AYNANC0 is 22.
Question: Does the 20AD040F0AYNANC0 have a Network Type?
Answer: None.
Question: What is the Ph. of the 20AD040F0AYNANC0?
Answer: The Rockwell-Automation 20AD040F0AYNANC0 has a Ph. of 3.
Question: What Rating is included with the Allen Bradley-Rockwell Automation 20AD040F0AYNANC0?
Answer: The Allen Bradley-Rockwell Automation 20AD040F0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What Voltage does the 20AD040F0AYNANC0 have?
Answer: The Voltage of the Allen-Bradley 20AD040F0AYNANC0 is 480 volts AC (alternating current).
For additional information about 20AD040F0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD040F0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD040F0AYNANC0/A | 20AD040F0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.