Allen-Bradley 22F-V4P5N103

The 22F-V4P5N103 from Allen-Bradley is a 1-phase, 120 volt AC-powered drive with a frequency of 50/60 hertz. It is a member of the PowerFlex product line drives' most cost-effective and condensed series, the PowerFlex 4M Changeable Frequency AC Drives. It features a 0.75 kilowatt (1.0 horsepower) output at 4.5 amps and a 2.2 kVA (18.0 amps) input with an operating voltage of 90 to 126 volts. It features a fuse 30 capacity for branching protective devices and a frame size B enclosure containing an IP20 NEMA/UL certification for panel installation. Furthermore, it offers a fixed keyboard line module, but there is no EMC filter and braking IGBT.

This Changeable Frequency AC Drive has a wide speed range and strong torque levels. Even when the load is increased, this superb speed control is maintained. When troubleshooting is required, the inbuilt keypad and LED, indicators may be used to check the drive's state or condition. There are two sorts of faults that can cause the drive to cease operating: the Auto Reset/Run fault, which will trigger a restart, and the non-resettable fault, which may need a motor or drive repair. The 22F-UM001D-EN-E user manual includes corrective steps for typical malfunction symptoms.

With a configurable PWM rate of up to 1000 hertz, the 22F-V4P5N103 Drive runs silently. It has a lay pre-charge function that contributes to the reduction of inrush current. DIP switches are used to configure the 24 volt DC control logic for Sink or source control. Its detachable MOV ensures dependable operation on both grounded and unground resistive distribution systems. By enabling Volts per Hertz control, it assures constant high performance. By simplifying and expediting the refit process, the feed-through wire design reduces installation needs. The speed control may be accomplished using an electrically separated 0 and 10 volt or 4 and 20 mA input.