The Allen-Bradley designed 25A-D6P0N114 has come from  PowerFlex 523 series, is an adjustable frequency AC Drive that operates on a 3-phase,  380-480V AC volts external supply,  provides an output voltage of 0-460V AC,  an output current of 6.0 amps, and maximum output power of 2.2 kilowatts (3 HP) for both normal and heavy-duty operation. It incorporates an RS485/DSI connection interface.
The 25A-D6P0N114 is frequently used to regulate the alternating current motor's functioning. It enables basic motor control functions such as start/stop, forward/reverse, jog, manual, and automatic motor control. The D6P0N114's 25A-customizable control approaches may be utilized to change the speed of the machine. Sensorless Vector Controlling features, Volts / Hertz mechanism, Sinusoidal Pulse Width Modulation (PWM) option, and Economizer SVC system are all supported by this drive. These tactics for speed and torque control may be used by the Drive.
Additionally, the 25A-D6P0N114 must be used to reduce the power consumption and safeguard the motor throughout the Drive's start-up, shutdown, idle, and active activities. Ramp-up, Ramp-down, Acceleration, and Deceleration are all customizable characteristics that aid in motor protection during rapid speed changes. Additionally, there are numerous motor stop modes that may be employed depending on the kind of operation required by the application.

When a motor slows down, the common/shared DC bus functionality may be used to recover electric power regeneration and distribute it with the other accelerated or functioning motors, providing for the highest suitable usage of energy. These I/O channels may be used to drive start/stop/reverse/speed commands, an alarm contact, or provide measurement or speed compared to other devices. Allen Bradley's 25A-D6P0N114 provides a broad variety of I/O channels. Analog Input No. 1 and Analog Output No. 1 are two I/O choices that may be configured to operate at a unipolar voltage or current (i.e., 0 - 10 Volts or 4milliamps to 20 milliamps). This device has one (1) Relay Output and five (5) Digital Inputs that may be configured for sink/source operation. With a replaceable Metal Oxide Varistor connected to the ground, the PowerFlex 523 series 25A-D6P0N114 is engineered to survive high input voltage conditions and to provide trouble-free functioning when used on unground distribution networks. An additional pre-charge relay reduces inrush current flows. The 25A-D6P0N114 AC Drive would handle a 10% overload for 1 min and a 150 % overload for three seconds time periods.