The Allen-Bradley 25B-D030N114 is an adjustable frequency drive manufactured by Rockwell Automation. It combines a variety of motor control options, communications, energy savings, and standard safety features in a cost-effective drive which makes it suitable for a wide array of applications. It features a detachable control module and power module that allow simultaneous configuration and installation. Each drive has a standard control module that can be used across the entire power range. These features, along with the integral keypad with local potentiometer and control keys that are active right out of the box, make the drive extremely user-friendly and easy to configure and use.

The Allen-Bradley 25B-D030N114 comes as a three-phase drive that has a power voltage rating of 480 volts of alternating current. The 25B-D030N114 features a current rating of 30 amperes as the output current and it comes with the standard interface module. The 25B-D030N114 features a Frame D frame size and it comes with the EMC filtering option. It communicates using an embedded Ethernet/IP port which allows for control over the Ethernet network, and it also has an integral RS-485 serial interface that allows for multi-drop communication configuration. This drive is a Frame D drive with an open type enclosure, and it has an operating temperature limit of -20 degrees to 50 degrees Celsius (-4 degrees to 122 degrees Fahrenheit) without derating.

The 25B-D030N114, an adjustable frequency AC drive produced by Allen-Bradley, should be housed inside an enclosure rated at IP20, or NEMA UL. It belongs to the 525 series from Allen-Bradley. At three phases, this drive has a voltage rating of 480 volts alternating current (AC). It is a standard interface which should be used with a D sized frame. It comes with one EMC filter. When it comes to installation, this drive should be either be DIN rail mounted or panel mounted. The built-in LCD HMI comes with support for multiple languages. The HMI is used for local configuration. This drive features isolation transformers and input line reactors. It also comes with protection for branch circuit. When operating at normal duty, this drive has an output rating of 20.0 horsepower, or the equivalent of 15.0 kilowatts. Additionally, when this device is operating on heavy-duty, it has an output rating of 15.0 horsepower, or 11.0 kilowatts. This drive has an output current of 30.0 amperes. 

The 25B-D030N114 comes with category 3 safety measures for PLD and SIL2 protection. It is in compliance with the 13848-1 standard from ISO. To cut down costs, this drive also features a motor control option. It can be controlled using the Volts/Hertz, SVC, or the Economizer SVC. To get the best out of all the supported control methods, users should use an encoder. For data input, users can use the LCD display, as well as the keypad.