GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AB-B730E-21 |
Series: | 1326 Motors |
Description:
The Allen-Bradley 1326AB-B730E-21 torque plus series AC servo motor provides a high continuous torque of 39.0 newton-meters, an output torque motor of 9.6 kilowatts and a high rated speed of 2800 revolutions per minute and 3350 revolutions per minute at an input voltage rating of 380 volts AC and 480 volts AC, respectively. This Allen-Bradley 1326AB-B730E-21 three-phase AC servo motor can be employed with the Allen-Bradley 1394 motion control systems for high-performance motion systems. This Allen-Bradley 1326AB-B730E-21 AC servo motor includes an extruded aluminium enclosure to improve heat transfer. This AC servo motor can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications and weighs approximately 62.6 kilograms (138 pounds) while shipping.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1326AB-B730E-21 torque plus series AC servo motor provides a high continuous torque of 39.0 newton-meters, an output torque motor of 9.6 kilowatts and a high rated speed of 2800 revolutions per minute and 3350 revolutions per minute at an input voltage rating of 380 volts AC and 480 volts AC, respectively. This Allen-Bradley 1326AB-B730E-21 three-phase AC servo motor can be employed with the Allen-Bradley 1394 motion control systems for high-performance motion systems. This Allen-Bradley 1326AB-B730E-21 AC servo motor includes an extruded aluminium enclosure to improve heat transfer. The Allen-Bradley 1326AB-B730E-21 can be mounted vertically at a different angle with the shaft up or down. This torque plus series AC servo motor produces torque efficiently over a large speed range and includes a sinusoidal-wound stator field to work smoothly at very low speeds.
The Allen-Bradley 1326AB-B730E-21 AC servo motor increases the servo response by using a dedicated flux profile permanent Allen-Bradley magnet. The Allen-Bradley 1326AB-B730E-21 torque plus series AC servo motor provides a normally closed thermal contact switch in the motor winding that supports a voltage rating of 115 volts AC/ 24 volts DC and a current rating of 1 ampere to provide a thermal overload status indication. This Allen-Bradley 1326AB-B730E-21 torque plus series AC servo motor includes a threaded hole on the shaft face to secure couplings. This Allen-Bradley torque plus series AC servo motor can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications and weighs approximately 62.6 kilograms (138 pounds) while shipping.
Manufacturer | Allen Bradley |
Series | 460V Torque Plus Series |
Product Type | Ferrite AC Servo Motor |
Frame Series | 194 mm frame diameter (215 mm bolt center) |
Motor magnet stack length | 30mm |
Rated Speed | 460V 3000 rpm/380V 2500 rpm |
Flange and Shaft Series | IEC Metric Flange with keyway |
MPN | 1326AB-B730E-21 |
Question: Does Automation Stop offer repairs on the 1326AB-B730E-21?
Answer: Yes. We offer repairs for the 1326AB-B730E-21 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B730E-21?
Answer: If you buy the 1326AB-B730E-21 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AB-B730E-21 online?
Answer: Yes. Automation Stop sells the 1326AB-B730E-21 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AB-B730E-21?
Answer: The 1326AB-B730E-21 is made by Allen Bradley - Motors.
Question: What type of product is the 1326AB-B730E-21?
Answer: The 1326AB-B730E-21 is part of the 1326 Motors series.
Question: What kind of Flange and Shaft Series does the Allen Bradley/Rockwell Automation 1326AB-B730E-21 have?
Answer: The 1326AB-B730E-21 includes IEC Metric Flange with keyway for its Flange and Shaft Series.
Question: What Frame Series does the 1326AB-B730E-21 have?
Answer: The Allen-Bradley 1326AB-B730E-21 has a Frame Series of 194 mm frame diameter (215 mm bolt center).
Question: What is the Motor magnet stack length of the 1326AB-B730E-21?
Answer: The Motor magnet stack length of the 1326AB-B730E-21 is 30mm.
Question: What Product Type is included with the Allen Bradley 1326AB-B730E-21?
Answer: The 1326AB-B730E-21 has a Ferrite alternating current (AC) Servo Motor Product Type.
Question: What is the Rated Speed of the 1326AB-B730E-21?
Answer: The Rated Speed of the Allen Bradley-Rockwell Automation 1326AB-B730E-21 is 460 volts 3000 revolutions per minute (RPM)/460 volts 2500 revolutions per minute (RPM).
For additional information about 1326AB-B730E-21 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B730E-21.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AB-B730E-21/A | 1326AB-B730E-21 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.