GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B320P-SK22AA |
Series: | MPL Servo Motors |
Description:
Allen-Bradley's MPL-B320P-SK22AA is a brushless servo motor. It is a permanent magnet-type motor with low inertia and a rotary motion. It has 400 volts of input voltage (rated), a frame having a size of 100 mm (millimeters), a magnetic stack with a length of 50.8 mm, and a 5000 rpm of rated speed. For the feedback, it features an encoder which is single turn. It has a keyless and seal-less shaft and a circular bayonet connector.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MPL-B320P-SK22AA is an alternating current (AC) servo motor and is an Allen-Bradley product. Due to the use os a permanent magnet in its structure, it has a small design and low inertia, allowing it to provide high power. It requires a 400 volts of input power and has a 1.5-kilowatt output rating. It can rotate at a rate of 5000 rpm (revolutions per minute). It is the highest speed that can be achieved. It has rotor inertia of 0.000078 kg-m2, continuous stall torque of 3.05 Nm (newton meters), and a peak stall torque of 7.91 Nm, respectively. It has a peak stall current of nearly 14.0 amperes and a continuous stall current of nearly 4.5 amperes.
It comes with a feedback system that includes a single-turn high-resolution encoder. It consists of a circular bayonet connector. The motor's shaft does not have a seal as well as a key. It has a 2 inches magnetic stack and a 100-millimeter frame with standard dimensions according to IEC 72-1. It can tolerate a radial shaft load of 40 kilograms at 5000 revolutions per minute, 45 kilograms at 3500 revolutions per minute, 55 kilos at 2000 revolutions per minute, 69 kilos at 1000 revolutions per minute, and 87 kilograms at 500 revolutions per minute. At 5000 revolutions per minute (rpm), it can sustain axial loads of 13 kilograms. This motor is approximately 3.7 kg in weight. It has a minimum IP50 certification for protection. It has smart motor technology that allows it to communicate with Kinetix drives.
MPN | MPL-B320P-SK22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 100 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B320P-SK22AA?
Answer: Yes. We offer repairs for the MPL-B320P-SK22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B320P-SK22AA?
Answer: If you buy the MPL-B320P-SK22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B320P-SK22AA online?
Answer: Yes. Automation Stop sells the MPL-B320P-SK22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA is part of the MPL Servo Motors series.
Question: Does the MPL-B320P-SK22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the Allen Bradley/Rockwell Automation MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA includes Circular bayonet, facing shaft for its Connectors.
Question: What Factory Designated Options are included with the Rockwell Automation MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA has a Single-turn high-resolution encoder Feeback.
Question: What Frame Size does the MPL-B320P-SK22AA have?
Answer: The MPL-B320P-SK22AA has a Frame Size of 100 mm.
Question: What is the Magnetic Stack Length of the Allen Bradley-Rockwell Automation MPL-B320P-SK22AA?
Answer: The Magnetic Stack Length of the MPL-B320P-SK22AA is 2 in.
Question: What Mounting Flange is included with the MPL-B320P-SK22AA?
Answer: The MPL-B320P-SK22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-B320P-SK22AA have?
Answer: The Allen Bradley Automation MPL-B320P-SK22AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: Does the Rockwell Automation MPL-B320P-SK22AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
Question: What Voltage Class does the Rockwell Automation MPL-B320P-SK22AA have?
Answer: The Rockwell Automation MPL-B320P-SK22AA has a Voltage Class of 400V.
For additional information about MPL-B320P-SK22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B320P-SK22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B320P-SK22AA/A | MPL-B320P-SK22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.