GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TLY-A2540P-HJ64AN

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: TLY-A2540P-HJ64AN
Series: TLY and TL Servo Motors

Description:

The Allen-Bradley designed TLY-A2540P-HJ64AN is a low-inertia servo motor, which has a 200 volts rated voltage and a rated speed of 5000 rpm. It also features a NEMA 34 frame size of 90 mm and a magnet stack length of 40. An IP 65-rated housing and a metal shaft key are included with the purchase of this product. This device has an approximate weight of 2.5 kilograms, and the operating temperature should remain between 0 and 40 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley created TLY-A2540P-HJ64AN is a low-inertia servo motor that is a part of the TLY family. A 230 volts AC supply, 0.86 kilowatts of power, a rotor inertia of 0.00011 kg-m², a 5000 rpm (revolutions per minute) rated speed, torque at a stall limit of 2.94 N-m, continuous stall current of 10 amperes, a peak stall torque of 7.1 N-m, and 24.8 amperes of peak stall current are the specifications for this motor. An incremental encoder (2000 lines) is included in this device, as well as a 24 volts DC (direct current) brake. This Allen-Bradley device has an approximate weight of 2.5 kilograms. As a result of its tiny size, this motor is especially well matched for operations that require a smaller motor with a high level of torque and power capabilities. A high torque density is achieved by the stator arrangement of this servo motor from Allen-Bradley, which makes it a viable option for high-speed applications. The operating temperature of this device should be maintained between 0 to 40 degrees Celsius. 

The NEMA mounting flange and shaft of the TLY-A2540P-HJ64AN servo motor are interoperable with the Kinetix 6000 series, as well as Kinetix 2000 series drives, allowing the motor to have Kinetix inbuilt support. This motor's high-energy Neodymium-Iron-Boron (NdFeB) magnets provide higher acceleration, and it comes with sturdy cable expansions, as well as a 17-bit serial connection for improved communication. Its memory stores the motor identification, and its communication protocol may automatically communicate that identity to other drives, minimizing the time required setting the drive. The TLY-A2540P-HJ64AN servo motor is often used in X-Y tables, specialty equipment, light packaging machines, material handling, and semiconductor production.

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives
Frame Sizes Metric and NEMA frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000
Voltage Class 200V-class windings
Frame Size 90 mm (3.54 in.) or NEMA 34
Motor stack length Four stack
Rated Speed 5000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with circular connectors, 1 m (39.4 in.)
Brake 24V DC Brake
Factory Options NEMA
MPN TLY-A2540P-HJ64AN
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TLY-A2540P-HJ64AN?

Answer: Yes. We offer repairs for the TLY-A2540P-HJ64AN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A2540P-HJ64AN?

Answer: If you buy the TLY-A2540P-HJ64AN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TLY-A2540P-HJ64AN online?

Answer: Yes. Automation Stop sells the TLY-A2540P-HJ64AN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN is made by Allen Bradley - Motors.


Question: What type of product is the TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN is part of the TLY and TL Servo Motors series.


Question: What is the Brake of the Allen Bradley TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN has a Brake of 24 volts direct current (DC) Brake.


Question: What is the Cable Extensions of the Allen Bradley-Rockwell Automation TLY-A2540P-HJ64AN?

Answer: The Cable Extensions of the TLY-A2540P-HJ64AN is 1 m (3.2ft).


Question: What kind of Certifications does the Allen Bradley TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What is the Compatible servo drives of the TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN has a Compatible servo drives of Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.


Question: What is the Connectors of the Allen Bradley/Rockwell Automation TLY-A2540P-HJ64AN?

Answer: The Allen Bradley/Rockwell Automation TLY-A2540P-HJ64AN has a Connectors of Cables with circular connectors, 1 m (39.4 in.).


Question: What is the Continuous stall torque of the Allen Bradley Automation TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN has a Continuous stall torque of 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the TLY-A2540P-HJ64AN?

Answer: The Enclosure of the TLY-A2540P-HJ64AN is IP65 housing.


Question: What kind of Factory Options does the Allen-Bradley TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN includes NEMA for its Factory Options.


Question: What is the Feedback of the TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN has a Feedback of 2000 lines/revolution, incremental encoder.


Question: What is the Frame Size of the TLY-A2540P-HJ64AN?

Answer: The Frame Size of the Allen Bradley Automation TLY-A2540P-HJ64AN is 90 mm (3.54 in.) or NEMA 34.


Question: What kind of Frame Sizes does the TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN includes Metric and NEMA frame sizes for its Frame Sizes.


Question: What is the Kinetix Compatibility of the Allen Bradley-Rockwell Automation TLY-A2540P-HJ64AN?

Answer: The TLY-A2540P-HJ64AN has a Kinetix Compatibility of offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.


Question: What kind of Magnets does the Allen Bradley-Rockwell Automation TLY-A2540P-HJ64AN have?

Answer: The Allen Bradley-Rockwell Automation TLY-A2540P-HJ64AN includes High-energy Neodymium-Iron-Boron (NeFeB) magnets for its Magnets.


Question: What Motor rated output does the TLY-A2540P-HJ64AN have?

Answer: The Rockwell Automation TLY-A2540P-HJ64AN has a Motor rated output of 0.037...2.0 kW.


Question: What Motor stack length does the Allen Bradley TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN has a Four stack Motor stack length.


Question: What Peak stall torque does the Allen Bradley-Rockwell Automation TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type does the TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What Rated Speed does the Allen Bradley TLY-A2540P-HJ64AN have?

Answer: The Rated Speed of the Allen Bradley TLY-A2540P-HJ64AN is 5000 revolutions per minute (RPM).


Question: What Shaft key does the TLY-A2540P-HJ64AN have?

Answer: The TLY-A2540P-HJ64AN has a Has Shaft key Shaft key.


Question: Does the Allen-Bradley TLY-A2540P-HJ64AN have a Shaft Seal?

Answer: No Shaft seal.


Question: What is the Voltage Class of the Allen Bradley Automation TLY-A2540P-HJ64AN?

Answer: The Voltage Class of the TLY-A2540P-HJ64AN is 200V-class windings.


Series information for TLY-A2540P-HJ64AN

For additional information about TLY-A2540P-HJ64AN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A2540P-HJ64AN.

Revision Part # Also Known As Availability
TLY-A2540P-HJ64AN/A TLY-A2540P-HJ64AN Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TLY-A2540P-HJG4AN
  • TLY-A254OP-HJ64AN
  • TLY-A254OP-HJG4AN
  • TLY-A2S40P-HJ64AN
  • TLY-A2S40P-HJG4AN
  • TLY-A2S4OP-HJ64AN
  • TLY-A2S4OP-HJG4AN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP