GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-A1001M-PJ12AA |
Series: | VPL Servo Motors |
Description:
Part number VPL-A1001M-PJ12AA is a low inertia servo motor that belongs to the Kinetix VP series of products. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This servo motor has a frame size of 100 millimeters and a magnetic stack length of 1 stack. The rated speed of this motor is 6000 rpm. This servo motor has an operating temperature that should range from 0 to 40 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley VPL-A1001M-PJ12AA servo motor is a low inertia Kinetix VP-series servo motor. It has a rated speed of 6,000 revolutions per minute (rpm), an operating voltage of 200 volts AC, a continuous stall torque of 1.95 Nm, a peak stall torque of 3.78 Nm, and a rated rotor inertia of 0.000044 kg-m². This servo motor has an approximate weight of 2.63 kilograms. It has a 100-millimeter frame and a 1-inch magnet stack length. This motor is IP50 rated and compatible with Kinetix 5500 and Kinetix 5700 servo drives. It offers a high torque to size ratio and can be used in a variety of industries such as processing, packaging, and automotive. Within 4096 revolutions, the VPL-A1001M-PJ12AA servo motor's 18-bit digital encoder can provide absolute position feedback. The encoder features an electromagnetic architecture that eliminates the need for a battery and is compatible with the Hiperface DSL encoder protocol. The VPL-A1001M-PJ12AA servo motor features an IEC metric mounting flange and mounting stud to ensure proper alignment with the machine during installation. This motor has a single right angle SpeedTec DIN connector that can be rotated 325 degrees. To improve acceleration, the Allen-Bradley VPL-A1001M-PJ12AA servo motor incorporates high-energy rare-earth magnets. In addition to the tapped hole in the shaft end, couplings or pulleys can be used to mechanically connect this motor to machines. It can be installed horizontally or vertically with the axis pointing up or down. The environmental ratings on the shaft are IP53 when the shaft is positioned downward, IP51 when the shaft is positioned horizontally, and IP50 when the shaft is positioned upwards when used without a shaft seal.
MPN | VPL-A1001M-PJ12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 200 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 1 |
Rated Speed | 6000 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-A1001M-PJ12AA?
Answer: Yes. We offer repairs for the VPL-A1001M-PJ12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-A1001M-PJ12AA?
Answer: If you buy the VPL-A1001M-PJ12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-A1001M-PJ12AA online?
Answer: Yes. Automation Stop sells the VPL-A1001M-PJ12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-A1001M-PJ12AA?
Answer: The VPL-A1001M-PJ12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-A1001M-PJ12AA?
Answer: The VPL-A1001M-PJ12AA is part of the VPL Servo Motors series.
Question: Does the Rockwell Automation VPL-A1001M-PJ12AA have a Brake?
Answer: No Brake.
Question: What Connector does the VPL-A1001M-PJ12AA have?
Answer: The Connector of the Rockwell-Automation VPL-A1001M-PJ12AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the VPL-A1001M-PJ12AA?
Answer: The Allen Bradley VPL-A1001M-PJ12AA has Factory Options Standard.
Question: What is the Feedback of the VPL-A1001M-PJ12AA?
Answer: The Feedback of the Allen-Bradley VPL-A1001M-PJ12AA is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-A1001M-PJ12AA?
Answer: The VPL-A1001M-PJ12AA has a Frame Size - Bolt Circle Diameter of 100 mm.
Question: What is the Magnet Stack Length of the VPL-A1001M-PJ12AA?
Answer: The Rockwell Automation VPL-A1001M-PJ12AA has a Magnet Stack Length of 1.
Question: What Mounting Flange does the Allen Bradley-Rockwell Automation VPL-A1001M-PJ12AA have?
Answer: The Allen Bradley-Rockwell Automation VPL-A1001M-PJ12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the Rockwell-Automation VPL-A1001M-PJ12AA?
Answer: The VPL-A1001M-PJ12AA has a Rated Speed of 6000 revolutions per minute (RPM).
Question: What Shaft Key is included with the VPL-A1001M-PJ12AA?
Answer: The Allen Bradley VPL-A1001M-PJ12AA has a Shaft key Shaft Key.
Question: What Voltage does the Rockwell Automation VPL-A1001M-PJ12AA have?
Answer: The Rockwell Automation VPL-A1001M-PJ12AA has a Voltage of 200 V.
For additional information about VPL-A1001M-PJ12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-A1001M-PJ12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-A1001M-PJ12AA/A | VPL-A1001M-PJ12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.