GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1746-BAS

✓ In Stock

1746-BAS Image 1 thumbnail
1746-BAS Image 2 thumbnail
1746-BAS Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1746-BAS
Series: SLC 500
UPC: 10662468250037

Description:

The Allen-Bradley 1746-BAS is a basic module that contains two (2) serial ports and a single DH-485 port to communicate with I/O devices. The module can be employed with SLC 500 systems. This device operates at a temperature range of zero (0) to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) and weighs approximately 340 grams (0.75 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$2,052.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$193.00

Available: 101

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$155.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1746-BAS? We can help!

Request a Quote

Key Features:

  • is a slc basic module
  • has rs-232/423, rs-422, rs-485, dh-485
  • has operating temperature of 32 to 140 degrees fahrenheit

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1746-BAS is a basic module that contains two (2) serial ports for RS-422, RS-232, and RS-485 communication protocols and a single DH-485 port to communicate with I/O devices. These ports offer a communication distance of 1230 meters (4035 feet). This module provides a battery backup RAM of 24 kilobytes and nonvolatile EEPROM memory modules of either 8 kilobytes or 32 kilobytes. The first serial port labeled “PRT1” is employed for RS-485, RS-232/RS-423, and RS-422 communication with I/O devices and the full-duplex mode by offering different data transfer rates from 300 bits per second to 19200 bits per second. The second port labeled “PRT2” is employed to interface external modules through the DFI protocol. The 1746-BAS includes also a DH-485 port to connect to a DH-485 network with either a half or full-duplex mode.

The 1746-BAS draws a backplane current of 150 milliamperes at 5 Volts DC and 40 milliamperes at 24 Volts DC. This module has eight (8) LED indicators to show the module and communication status and to help the troubleshooting process when issues occur. The 1746-BAS employs the backplane optical isolation provided by optocouplers to offer electrical isolation of 1500 Volts AC between the control logic and I/O points. This device is a single slot module that can be mounted on an SLC 500 chassis slot and provides the NEMA standard for noise immunity. The module can be employed with SLC 500 systems. This device operates at a temperature range of zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and weighs approximately 340 grams (0.75 pounds) while shipping.

Technical Specifications

Region of Manufacture* United States
Brand Allen-Bradley / Rockwell Automation
Series SLC 500
Part Number 1746-BAS
Description SLC 500 Basic Module
Communication Ports Port 1: RS-232/423, -422, -485 / Port 2: RS-232/423, -422, -485, DF1 / Port 3: DH-485
Backplane Current 150 mA at 5 Volts DC - 40 mA at 24 Volts DC
LED Indicators ACT, 485, PRT1, PRT2, FAULT, BAT LOW, LED 1, LED 2
Communication RS-232/423, RS-422, RS-485, DH-485
Memory 24 Kilobytes battery-supported RAM / 8K or 32K byte EEPROM
Operating Temperature Range 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Weight 340 g (0.75 lb)

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1746-BAS?

Answer: Yes. We offer repairs for the 1746-BAS and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1746-BAS?

Answer: If you buy the 1746-BAS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1746-BAS online?

Answer: Yes. Automation Stop sells the 1746-BAS online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1746-BAS?

Answer: The 1746-BAS is made by Allen Bradley - PLC.


Question: What type of product is the 1746-BAS?

Answer: The 1746-BAS is part of the SLC 500 series.


Question: What is the Backplane Current of the 1746-BAS?

Answer: The Backplane Current of the 1746-BAS is 150 mA at 5 Volts DC (direct current) - 40 mA at 24 Volts DC (direct current).


Question: What Brand does the Allen Bradley/Rockwell Automation 1746-BAS have?

Answer: The 1746-BAS has a Allen Bradley / Rockwell Automation Brand.


Question: What is the Communication of the Allen Bradley 1746-BAS?

Answer: The Communication of the Allen Bradley 1746-BAS is RS-232/423, RS-422, RS-485, DH-485.


Question: What Communication Ports does the 1746-BAS have?

Answer: The Communication Ports of the Rockwell Automation 1746-BAS is Port 1: RS-232/423, -422, -485 / Port 2: RS-232/423, -422, -485, DF1 / Port 3: DH-485.


Question: What is the Description of the 1746-BAS?

Answer: The Description of the 1746-BAS is SLC 500 Basic Module.


Question: What is the LED Indicators of the 1746-BAS?

Answer: The LED Indicators of the Rockwell Automation 1746-BAS is ACT, 485, PRT1, PRT2, FAULT, BAT LOW, LED 1, LED 2.


Question: What random-access memory (RAM) does the Allen Bradley Automation 1746-BAS have?

Answer: The 1746-BAS has a random-access memory (RAM) of 24 Kilobytes battery-supported RAM (random-access random-access memory (RAM)) / 8K or 32K byte EEPROM.


Question: What Operating Temperature Range does the 1746-BAS have?

Answer: The Allen Bradley 1746-BAS has a Operating Temperature Range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).


Question: What is the unit Number of the 1746-BAS?

Answer: The 1746-BAS has a unit Number of 1746-BAS.


Question: What Region of Manufacture* is included with the 1746-BAS?

Answer: The 1746-BAS has a United States Region of Manufacture*.


Question: What Weight does the Rockwell Automation 1746-BAS have?

Answer: The Rockwell Automation 1746-BAS has a Weight of 340 g (0.75 lb).


Series information for 1746-BAS

For additional information about 1746-BAS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-BAS.

Revision Part # Also Known As Availability
1746-BAS/A 1746-BAS Ser A, Series A, Rev A Request a Quote
1746-BAS/B 1746-BAS Ser B, Series B, Rev B Request a Quote
1746-BAS/C 1746-BAS Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1746-BA5
  • 1746-8AS
  • 1746-8A5
  • 174G-BAS
  • 174G-BA5
  • 174G-8AS
  • 174G-8A5
  • I746-BAS
  • I746-BA5
  • I746-8AS
  • I746-8A5
  • I74G-BAS
  • I74G-BA5
  • I74G-8AS
  • I74G-8A5

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP