GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1746-HSCE

✓ In Stock

1746-HSCE Image 1 thumbnail
1746-HSCE Image 2 thumbnail
1746-HSCE Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1746-HSCE
Series: SLC 500
UPC: 10662073893681

Description:

The Allen-Bradley 1746-HSCE is a High-Speed Counter Module that has a single input and four (4) outputs. These I/O points support a voltage of 5 Volts DC, 12 Volts DC, or 24 Volts DC. This HSC module offers three (3) different operating modes: the range mode, the rate mode, and the sequencer mode. This module can be employed with SLC 500 to process digital signals. The 1746-HSCE draws a backplane current of 32 milliamperes at 5 Volts DC. This digital device weighs approximately 210 grams (0.46 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,596.00

Available: 18

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$209.00

Available: 80

What is Refurbished

Your order will ship by . Need it faster?

Looking for a 1746-HSCE? We can help!

Request a Quote

Key Features:

  • is a high-speed counter module

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1746-HSCE is a High-Speed Counter Module that has a single input and four (4) open-collector outputs. These I/O points support a voltage of 5 Volts DC, 12 Volts DC, or 24 Volts DC. This HSC module provides three (3) different operating modes: the range mode with a frequency of 50 Kilohertz and an update time of 3.9 milliseconds, the rate mode with a frequency of 32 Kilohertz and an update time of 70 milliseconds, and the sequencer mode with a frequency of 50 Kilohertz and an update time of 1.8 milliseconds. This module can be employed with an SLC 500 to process digital signals. The 1746-HSCE draws a backplane current of 32 milliamperes at 5 Volts DC.

The device provides a single bidirectional counting channel that can be employed as a pulse/direction, up/down, or quadrature counter input. The 1746-HSCE can be employed to control and monitor high-speed or motion machines such as motors, packaging, and flow monitoring applications. This module has LED indicators to show the module and I/O points status and to help the troubleshooting process when issues occur. The 1746-HSCE employs the backplane optical isolation provided by optocouplers to offer electrical isolation of 1500 Volts AC between the control logic and I/O points. This device is a single slot module that can be mounted on an SLC 500 chassis slot and provides the NEMA standard for noise immunity. This digital device operates at a temperature range of zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and weighs approximately 210 grams (0.46 pounds) while shipping.

Technical Specifications

Region of Manufacture* United States
Type High Speed Encoder Counter
Brand Allen-Bradley / Rockwell Automation
Series SLC 500
Part Number 1746-HSCE
Description SLC 500 High-Speed Counter Module
Inputs 1 Count Input
Outputs 4
Input Frequency Range 50 Kilohertz
Update Time 4.8 milliseconds
Number of Slots 1
Backplane Current 32 milliamperes at 5 Volts
Step Response 100 milliseconds in, 2.5 milliseconds out
I/O Connection 1746-RT25G
Weight 210 grams (0.46 pounds)

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1746-HSCE?

Answer: Yes. We offer repairs for the 1746-HSCE and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1746-HSCE?

Answer: If you buy the 1746-HSCE through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1746-HSCE online?

Answer: Yes. Automation Stop sells the 1746-HSCE online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1746-HSCE?

Answer: The 1746-HSCE is made by Allen Bradley - PLC.


Question: What type of product is the 1746-HSCE?

Answer: The 1746-HSCE is part of the SLC 500 series.


Question: What Backplane Current does the Allen Bradley 1746-HSCE have?

Answer: The Backplane Current of the Allen Bradley 1746-HSCE is 32 milliamperes at 5 Volts.


Question: What Brand does the 1746-HSCE have?

Answer: The 1746-HSCE has a AB / Rockwell Automation Brand.


Question: What is the Description of the 1746-HSCE?

Answer: The 1746-HSCE has a Description of SLC 500 High-Speed Counter Module.


Question: What input/output Connection does the 1746-HSCE have?

Answer: The input/output Connection of the Allen Bradley Automation 1746-HSCE is 1746-RT25G.


Question: What is the Input Frequency Range of the 1746-HSCE?

Answer: The Input Frequency Range of the Allen-Bradley 1746-HSCE is 50 Kilohertz.


Question: What is the Inputs of the Allen Bradley 1746-HSCE?

Answer: The Allen Bradley 1746-HSCE has a Inputs of 1 Count Input.


Question: What is the Number of Slots of the Rockwell-Automation 1746-HSCE?

Answer: The Rockwell-Automation 1746-HSCE has a Number of Slots of 1.


Question: What is the Outputs of the Rockwell-Automation 1746-HSCE?

Answer: The 1746-HSCE has a Outputs of 4.


Question: What unit Number does the Allen Bradley Automation 1746-HSCE have?

Answer: The 1746-HSCE has a component Number of 1746-HSCE.


Question: What Region of Manufacture* does the 1746-HSCE have?

Answer: The Allen Bradley/Rockwell Automation 1746-HSCE has a United States Region of Manufacture*.


Question: What is the Step Response of the 1746-HSCE?

Answer: The Allen Bradley/Rockwell Automation 1746-HSCE has a Step Response of 100 milliseconds in, 2.5 milliseconds out.


Question: What Update Time does the 1746-HSCE have?

Answer: The 1746-HSCE has a Update Time of 4.8 milliseconds.


Question: What Weight does the Allen Bradley Automation 1746-HSCE have?

Answer: The Weight of the 1746-HSCE is 210 grams (0.46 pounds).


Series information for 1746-HSCE

For additional information about 1746-HSCE check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-HSCE.

Revision Part # Also Known As Availability
1746-HSCE/A 1746-HSCE Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1746-H5CE
  • 174G-HSCE
  • 174G-H5CE
  • I746-HSCE
  • I746-H5CE
  • I74G-HSCE
  • I74G-H5CE

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP