GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-ACN15

✓ In Stock

1771-ACN15 Image 1 thumbnail
1771-ACN15 Image 2 thumbnail
1771-ACN15 Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-ACN15
Series: PLC 5
UPC: 10612598180421

Description:

Part number 1771-ACN15 is a one-port ControlNet communication interface module belonging to Allen-Bradley. The module consists of an interface with a single port along with non-redundant media. It uses the network architecture of ControlNet with a default version of 1.5 which can be upgraded. The current rating for the adapter of the module is one (1.0) ampere (A) and the voltage supply rating is five (5) volts direct current (DC).



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$427.00

Available: 33

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$342.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-ACN15? We can help!

Request a Quote

Key Features:

  • is a i/o adaptor module
  • utilizes bnc for nonredundant media operation & nap (rj-45 8-pin w/ shield) connector
  • provides dimensions of 3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-ACN15 is a one-port ControlNet communication interface module that was manufactured by Allen-Bradley / Rockwell Automation. The module consists of the ControlNet which is the communication architecture that exchanges messages between Allen-Bradley products and other third-party products with certification. Other features of the 1771-ACN15 module include the capability of data transfer with high speed, it provides the ability to generate diagnostic messages, allows the Network Access Port (NAP) to provide local network communication, and allows the ControlNet version which is version 1.5 to be updated. In 1771-ACN15, the module has a non-redundant media interface while in 1771-ACNR15, the module has a redundant media interface.

In terms of hardware, the adapter module has six (6) major kinds of components. The first components are ControlNet status indicators, the second component is the status display, the third component is a pushbutton for the communication reset, the fourth component is the Network Access Port (NAP), the fifth component is the ControlNet connector, to which there is only one (1) on part number 1772-ACN15, and the sixth component lies on top of the module which is the module net switch assemblies. BNC connectors are the main connectors used for cable connection to the module and the connection happens at the front portion of the module. The rated current requirement of this device is one (1.0) ampere (A). In addition to that, the rated voltage requirement for this device is five (5) volts direct current (DC). The power supply of this Allen-Bradley module is provided via the backplane.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-ACN15?

Answer: Yes. We offer repairs for the 1771-ACN15 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-ACN15?

Answer: If you buy the 1771-ACN15 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-ACN15 online?

Answer: Yes. Automation Stop sells the 1771-ACN15 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-ACN15?

Answer: The 1771-ACN15 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-ACN15?

Answer: The 1771-ACN15 is part of the PLC 5 series.


Question: What amperage does the 1771-ACN15 have?

Answer: The 1771-ACN15 by Allen Bradley - PLC has a amperage of 1771.


Series information for 1771-ACN15

For additional information about 1771-ACN15 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-ACN15.

Revision Part # Also Known As Availability
1771-ACN15/A 1771-ACN15 Ser A, Series A, Rev A Request a Quote
1771-ACN15/B 1771-ACN15 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1771-ACN1S
  • 1771-ACNI5
  • 1771-ACNIS
  • 177I-ACN15
  • 177I-ACN1S
  • 177I-ACNI5
  • 177I-ACNIS
  • I771-ACN15
  • I771-ACN1S
  • I771-ACNI5
  • I771-ACNIS
  • I77I-ACN15
  • I77I-ACN1S
  • I77I-ACNI5
  • I77I-ACNIS

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP