GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-AD |
Series: | 1771 |
Description:
Designed and produce by Allen Bradley / Rockwell Automation, part number 1771-AD is an I/O rack chassis. It belongs to the Bulletin 1771 product line. This chassis is primarily used with PLC 5 modules but may also be used with PLC 2 modules. This I/O rack chassis has a total of 60 slots. This device has a width that measures 24.01 millimeters. The operating temperature of this I/O rack chassis ranges from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-AD is an I/O rack chassis used primarily with programmable logic controller series 5 (PLC 5) modules. This device belongs to the Bulletin 1771 series of products, and it was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device is interoperable with some of the PLC-2 controller modules, as well. This I/O chassis is engineered to offer a backplane connectivity solution to the modules, especially within the PLC family. This includes a wide range of input modules, output modules, relays, and analog modules. The 1771-AD is a 16-slot I/O rack chassis. Users can mount this I/O chassis on a back panel mount. The enclosure type of this unit is open, implying that specific safety standards should be followed during its mounting. The Allen Bradley 1771-AD I/O chassis has a width that measures 24.01 millimeters. To ensure that this I/O chassis functions to its full potential, it is necessary to adhere to the general specifications for environmental conditions. In this case, the operational temperature rating should be kept between 0 and 60 degrees Celsius. It can also be stored at temperatures ranging from -40 to 85 degrees Celsius. Furthermore, the relative humidity range is non-condensing from 0 to 95 percent. This device can withstand an operational shock rated up to 15 G, as well as a non-operational shock rated up to 30 G. This I/O chassis can also withstand a vibration rated up to 2G at a frequency range of 10 to 500 hertz. This 1771 I/O chassis model has a radiated RF immunity range of 10 V/m.
Question: Does Automation Stop offer repairs on the 1771-AD?
Answer: Yes. We offer repairs for the 1771-AD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-AD?
Answer: If you buy the 1771-AD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-AD online?
Answer: Yes. Automation Stop sells the 1771-AD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-AD?
Answer: The 1771-AD is made by Allen Bradley - PLC.
For additional information about 1771-AD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-AD.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-AD/A | 1771-AD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.