GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-HS3CR

✓ In Stock

1771-HS3CR Image 1 thumbnail
1771-HS3CR Image 2 thumbnail
1771-HS3CR Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-HS3CR
Series: PLC 5

Description:

Part number 1771-HS3CR is a three (3) axis servo controller module that was designed and manufactured by Allen Bradley / Rockwell Automation. This device has a rated fuse voltage of 120 volts, as well as a backplane current of 1.7 amperes. The maximum input frequency of this module is 250 kilohertz single-ended differential input. This device has physical dimensions that measure 89 mm x 165 mm x 51 mm. It has an operating temperature range of 0 to 60 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$238.00

Available: 14

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$191.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-HS3CR? We can help!

Request a Quote

Key Features:

  • is a 3 axis servo controller module
  • has dimensions of 3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This controller module was created and designed by Allen Bradley with the catalog number 1771-HS3CR. This module is a three (3) axis servo controller module. This module has a fuse voltage rated at one hundred and twenty (120) volts, along with a backplane current of one-point-seven (1.7) amperes. It also has a maximum input frequency of two hundred and fifty (250) kilohertz (kHz) single-ended differential input. This module is c-UL, C-TICK, and CE certified. Apart from that, the update period for this Allen Bradley unit is two (2) milliseconds per axis (ms/axis). In addition to that, the pulse capture time for the module is fifty (50) to 9.999 microseconds. Part number 1771-HS3CR has physical dimensions that measure 3.5 inches x 6.5 inches x 2.0 inches, which is the equivalent of 89 millimeters x 165 millimeters x 51 millimeters. Operators must keep in mind that this module, the 1771-HS3CR, must be operated in an environment that has a temperature ranging from zero (0) degrees Celsius to sixty (60) degrees Celsius. Additionally, the relative humidity of the environment surrounding the 1771-HS3CR should have levels that range from five (5) percent to ninety-five (95) percent. The relative humidity should also have no condensation. Apart from that, an axis E-stop and a fifty (50) pin input / output (I/O) connection, which may also be utilized to provide fast input / output (I/O) power, accepts encoder feedback signals along with resolver feedback signals, as well as E-stop status and E-stop starting signals to this unit.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-HS3CR?

Answer: Yes. We offer repairs for the 1771-HS3CR and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-HS3CR?

Answer: If you buy the 1771-HS3CR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-HS3CR online?

Answer: Yes. Automation Stop sells the 1771-HS3CR online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-HS3CR?

Answer: The 1771-HS3CR is made by Allen Bradley - PLC.


Question: What type of product is the 1771-HS3CR?

Answer: The 1771-HS3CR is part of the PLC 5 series.


Series information for 1771-HS3CR

For additional information about 1771-HS3CR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-HS3CR.

Revision Part # Also Known As Availability
1771-HS3CR/A 1771-HS3CR Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1771-H53CR
  • 177I-HS3CR
  • 177I-H53CR
  • I771-HS3CR
  • I771-H53CR
  • I77I-HS3CR
  • I77I-H53CR

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP