GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-OF8IH |
Series: | 1794 |
Description:
The Allen Bradley corporation designed and manufactured the 1794OF8IH module to serve as an isolated analog HART module. This module has 8 single ended, isolated, and configurable outputs with rated currents of 0 to 20 milliamperes and 4 to 20 milliamperes with a resolution of 16 bits. Allen Bradley recommends using the module only with ATEX-rated backplanes. Its peak thermal dissipation is 17.06 British Thermal Unit per hour (BTU/hr). The physical dimensions of this module measure 3.7 inches x 3.7 inches x 2.6 inches.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The FLEX Input or Output product line by Allen Bradley includes this module, the 1794-OF8IH output module, which is a HART isolated analog output module. This device by Allen Bradley has eight isolated single ended outputs and it features a sixteen bit unipolar output resolution and a conversion type of sixteen bit digital to analog converter with a conversion rate of ten milliseconds. At fifty and sixty Hz, this module has a typical mode rejection ratio of sixty decibels and the standard load resistance range is zero to seven-fifty Ohms, with a peak load reactance of ten millihenries. The module is calibrated at the factory. The module has a maximum continuous overload of 30 volts or 32 milliamperes, one channel at a time. It has a continuous isolation voltage of 120 volts, and it was tested at 1000 volts AC for 60 seconds between user power to the system, channel to the system, and channel to channel. At 5 volts DC, the Flexbus has a current rating of fifty milliamperes.
Furthermore, at twenty four volts of direct current, this output module's peak current dissipation is five watts and its peak thermal dissipation is 17.06 British Thermal Unit per hour (BTU/hr). This module measures 3.7 inches x 3.7 inches x 2.6 inches. The ideal operating temperature of this Allen Bradley device ranges from zero to fifty-five degrees Celsius. The ideal storage temperature range for this product is negative forty (-40) to eighty-five (85) degrees Celsius. Additionally, this Allen Bradley module has a vibration rated of five (5) G at a frequency range of ten (10) to five hundred (500) hertz.
Question: Does Automation Stop offer repairs on the 1794-OF8IH?
Answer: Yes. We offer repairs for the 1794-OF8IH and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-OF8IH?
Answer: If you buy the 1794-OF8IH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-OF8IH online?
Answer: Yes. Automation Stop sells the 1794-OF8IH online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-OF8IH?
Answer: The 1794-OF8IH is made by Allen Bradley - PLC.
Question: What voltage does the 1794-OF8IH have?
Answer: The 1794-OF8IH by Allen Bradley - PLC has a voltage of 24.
For additional information about 1794-OF8IH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-OF8IH.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-OF8IH/A | 1794-OF8IH Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.