GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-C85NBR |
Series: | SMC-3 |
Description:
The Allen-Bradley 150-C85NBR, which is a smart motor controller that is a part of the SMC-3 series of products, has a line voltage rating of 200 - 460 volts alternating current. The control voltage is 24 volts direct current and 24 volts alternating current, 3-phase at 50 and 60 hertz. Both Delta and Line controllers are compatible with this controller unit. This product features an open type enclosure. Additionally, this smart motor controller requires a maximum output current of 85 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 150-C85NBR, which was produced by Rockwell Automation / Allen-Bradley, is a smart motor controller, categorized under the SMC-3 series of products. As far as operations are concerned, the Allen-Bradley 150-C85NBR can be used with kickstart, soft start, coast to stop, soft stop, and current limiting. Due to its configurable stopping and starting modes, the Allen-Bradley 150-C85NBR can limit the production of inrush current, as well as minimize the effects of mechanical stress on the motor. The selectable start time feature on the Allen-Bradley 150-C85NBR allows the user to stretch the start period. It also allows the user to expand the acceleration time across the selected time. The torque control allows the motor a minimum torque that is 65% of locked rotor torque. Following the full load current, the Allen-Bradley 150-C85NBR comes with a selectable current limit feature that allows flexible adjusting of the starting current. Its selectable overload trip class helps the motors achieve the required tripping category.
The 150-C85NBR has many technical specifications associated with it. This device has a line voltage rating of two hundred (200) to four hundred and sixty (460) volts alternating current. It also has a control voltage of twenty-four (24) volts direct current and twenty-four (24) volts alternating current, with three (3) phases at a frequency range of 50 to 60 hertz. The output current of this controller is eighty-five (85) amperes at maximum.
MPN | 150-C85NBR |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | SMC-3 Controller |
Controller Type | SMC-3 |
Amps | 85 A |
Enclosure Type | Open |
Input Line Voltage | 200...460V AC, 3-Phase, 50/60 Hz |
Voltage | 24V AC/DC |
Question: Does Automation Stop offer repairs on the 150-C85NBR?
Answer: Yes. We offer repairs for the 150-C85NBR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-C85NBR?
Answer: If you buy the 150-C85NBR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-C85NBR online?
Answer: Yes. Automation Stop sells the 150-C85NBR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-C85NBR?
Answer: The 150-C85NBR is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-C85NBR?
Answer: The 150-C85NBR is part of the SMC-3 series.
Question: What is the amperes of the 150-C85NBR?
Answer: The amperes of the Allen-Bradley 150-C85NBR is 85 A.
Question: What Controller Type does the Allen-Bradley 150-C85NBR have?
Answer: The Controller Type of the Allen-Bradley 150-C85NBR is SMC-3.
Question: What Enclosure Type does the Allen-Bradley 150-C85NBR have?
Answer: The Allen-Bradley 150-C85NBR has a Open Enclosure Type.
Question: What is the Input Line Voltage of the 150-C85NBR?
Answer: The Input Line Voltage of the 150-C85NBR is 200...460 volts alternating current (AC), 3-Phase, 50/60 Hz.
Question: What Voltage does the 150-C85NBR have?
Answer: The Voltage of the Rockwell Automation 150-C85NBR is 24 volts alternating current (AC)/direct current.
For additional information about 150-C85NBR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-C85NBR.
Revision Part # | Also Known As | Availability |
---|---|---|
150-C85NBR/A | 150-C85NBR Ser A, Series A, Rev A | Request a Quote |
150-C85NBR/B | 150-C85NBR Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.