GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 190S-GND3-FC45C |
Series: | 190S |
Description:
The 190S-GND3-FC45C from Allen Bradley is a starter device. This device is equipped with one (1) normally open (NO) auxiliary contact, as well as one (1) normally closed (NC) auxiliary contact. This device has a rated input voltage of 110 volts at 50 hertz and 120 volts and 60 hertz. Additionally, it has a rated current of 32 to 45 amperes. This device has an open-type enclosure and can be mounted via a DIN rail mount.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 190S-GND3-FC45C is a starting device that is a combined starter and circuit breaker in small package size. It has a contactor size of 100-C43 and a contact arrangement with one (1) normally open (NO) contact and one (1) normally closed (NC) contact, and the auxiliary contacts are wired to a terminal block at the bottom of the starter assembly to provide power. It has an open enclosure, and it may be mounted with screws or with a DIN rail system. This starting unit requires a rated coil voltage of 110 volts AC at 50 hertz or 120 volts AC at 60 hertz, as well as a rated current of 32 to 45 amperes, to function properly.
These starters may be utilized in a group motor operation or as a stand-alone device, and they do not need any extra to short-circuit protection in the motor branch circuits to be effective in either situation. Moreover, conveyor belts, pulleys, industrial machinery, overhead doors, cranes, and hoists are just a few of the uses available. Being CULus-listed, this starter is of type F combination motor control systems, type 1 and 2 coordination, and is a combination motor controller. It may come with an optional inbuilt surge suppressor as an option.
According to IEC 60947-4-1, this 190S compact starter is equipped with a Bulletin 140M motor protection circuit breaker and a Bulletin 100-C contactor, and it has short-circuited coordination types 1 and 2 according to the manufacturer's specifications. This module is a full device that includes internal wiring and is ready to be connected.
Question: Does Automation Stop offer repairs on the 190S-GND3-FC45C?
Answer: Yes. We offer repairs for the 190S-GND3-FC45C and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 190S-GND3-FC45C?
Answer: If you buy the 190S-GND3-FC45C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 190S-GND3-FC45C online?
Answer: Yes. Automation Stop sells the 190S-GND3-FC45C online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 190S-GND3-FC45C?
Answer: The 190S-GND3-FC45C is made by Allen Bradley - Miscellaneous.
For additional information about 190S-GND3-FC45C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 190S-GND3-FC45C.
Revision Part # | Also Known As | Availability |
---|---|---|
190S-GND3-FC45C/A | 190S-GND3-FC45C Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.