GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 400-DP60ND3 |
Series: | 400 |
Description:
Allen-Bradley manufactured the 400-DP60ND3 Magnetic Contactor. It is a specific purpose contactor that is part of the Bulletin 400 range of products. It needs a three-phase, three-pole power supply with a 60-ampere current rating at 400 VAC, a maximum voltage level of 600 V, and power ratings of 25 horsepower at 200/208V, 25 horsepower at 240/277V, 30 horsepower at 480V, and 30 horsepower at 600V. It includes a coil voltage of 120V AC with a frequency of 50/60 hertz and an AC magnetic coupler that works with Bulletin 400 motor control schemes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This magnetic contactor from Allen-Bradley, which has the product number 400-DP60ND3, runs at a frequency of 60 hertz. This device was designed as part of the Bulletin 400 series of Allen-Bradley products and was designed to perform a single function. In addition, it contains an alternating current (AC) magnetic contactor that operates at an alternating current frequency of 50/60 hertz, and it was designed for use with Bulletin 400 motor controller systems. Aside from that, it includes snap-on auxiliary connectors and short circuit current ratings for both regular and high fault short circuits (SCCR). This module receives power from the wire. The 400-DP60ND3 also has double-break contacts and quick-connect terminals.
Part number 400-DP60ND3 requires the use of a 3-pole, three-phase electrical supply with a rated current of 60 amperes at 400 volts AC and a maximum voltage threshold of 600 volts, as well as power ratings of 25 Hp (horsepower) at 200 to 208 volts, 25 horsepower at 240 to 277 volts, 30 horsepower at 480 volts, and 30 horsepower at 600 volts. The Allen-Bradley Bulletin 400 Definite Purpose contactors are specially developed for use in a variety of applications such as air conditioners, refrigerators, resistive warming, data processing, and food maintenance and it repairs types of machinery, pumps, and compressors, amongst other things. Box lugs are standard on contactors with a current rating of 40 amperes or above. Using this type 400-DP60 module, a maximum of two auxiliary contact blocks on either side, for a total of four contacts, may be field placed in the field. The 400-DP60ND3 has been UL tested for lighting loads and is CSA approved. It also complies with the ARI 780/790 Standard, is CE registered and is RoHS compliant.
Question: Does Automation Stop offer repairs on the 400-DP60ND3?
Answer: Yes. We offer repairs for the 400-DP60ND3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 400-DP60ND3?
Answer: If you buy the 400-DP60ND3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 400-DP60ND3 online?
Answer: Yes. Automation Stop sells the 400-DP60ND3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 400-DP60ND3?
Answer: The 400-DP60ND3 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 400-DP60ND3 have?
Answer: The 400-DP60ND3 has a voltage of 120.
Question: What amperage is included with the 400-DP60ND3?
Answer: The Allen Bradley - Miscellaneous 400-DP60ND3 has a amperage of 60.
For additional information about 400-DP60ND3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 400-DP60ND3.
Revision Part # | Also Known As | Availability |
---|---|---|
400-DP60ND3/A | 400-DP60ND3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.