GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440F-C28011 |
Series: | 440F |
Description:
It is an Allen Bradley/ Rockwell Automation Matguard mat safety unit from the 440F series. This unit can consume 9VA or 12W power, and a 24V DC -20% +10% is supplied for the operation of this unit. This mat unit has eight safety inputs, two safety outputs, and an additional auxiliary safety output, independent and voltage free. In addition, this unit has the protection of IP65, steel enclosure, and LEDs for the operations' status.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440F-C28011 is an Allen Bradley Madguard mat control unit for pressure-sensitive safety mat systems. The primary function of this unit is to increase safety by detecting the pressure and allowing the operators to prevent any harm to the industrial equipment. It is from the 440F product line. This unit powers on 24V DC -20% +10% voltage range and has 9V A or 12 W power consumption. Aside from that, it has eight 4-pin micro-QD M12 safety mat inputs. This unit has both manual and automatic reset buttons or monitored manual on all versions, and all of its reset modes are also configurable. Its response time is 35ms, and there is a machine-enabled reset LED indicator available on this unit. In addition, it has two N/O independent voltage range outputs and one voltage-free auxiliary output. On the contrary, the operating temperature of this unit is -10 to 45°C (+14 to 113F), and this unit is rated on 250v insulation voltage.
Its contaminant level is two, and impulse withstand voltage rating is 2500v. Furthermore, it contains an IP65 steel enclosure for protection, and its torque settings main screw type is 1,3 Nm. The vibration is 0.15 mm, 10 to 55 Hz, while its shock-absorbing is 10 g, 11 ms, half-sine. The compatible mat wiring ratings for this unit are 18 to 22 AWG (300v, 2A) with 2m (6.5ft) and 5m (16.4ft), and 10m (32.8ft). Operators must follow the additional information regarding the configuration of this module in the product manual from the makers.
Question: Does Automation Stop offer repairs on the 440F-C28011?
Answer: Yes. We offer repairs for the 440F-C28011 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440F-C28011?
Answer: If you buy the 440F-C28011 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440F-C28011 online?
Answer: Yes. Automation Stop sells the 440F-C28011 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440F-C28011?
Answer: The 440F-C28011 is made by Allen Bradley - Miscellaneous.
For additional information about 440F-C28011 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440F-C28011.
Revision Part # | Also Known As | Availability |
---|---|---|
440F-C28011/A | 440F-C28011 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.