GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-G23108 |
Series: | 440R |
UPC: | 10611320826484 |
Description:
Belonging to the MSR124RT series of products, part number 440R-G23108 is a Guard Master safety relay. This safety relay was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. The power supply rating of this relay is 24 volts AC/DC, 115 volts AC, or 230 volts AC. The power consumption rating is 5 watts. The enclosure of this product has an Ingress Protection rating of IP40. This device has a mechanical life estimated at 10,000,000 cycles.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440R-G23108 is a high safety relay simply referred to as a Guard Master safety relay. This product is featured in the MSR124RT product family. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This safety relay operates via a 115 volts AC/ 24 volts DC power supply and can draw a current rated at 3 amperes. This device has a rated power consumption of 5 watts. The maximum allowable input resistance of this device is 45 ohms. This Allen Bradley device has an output rating of 30 volts DC at an output current rated at 20 milliamperes. The hardware quality of this safety relay is highly durable and robust thanks to its enclosure type, which is rated as IP20 and IP40. This unit is a straightforward device, suggesting that it is simple to mount, fix, and use in various industries. As far as its mounting type is concerned, users can easily mount it using DIN rail mount. Aside from that, its terminal is fixed and has a fifteen (15)-millisecond response time. This Allen Bradley device is equipped with LED, or light emitting diode, indicators. The contact configuration includes one (1) or two (2) normally closed (NC) safety inputs, as well as seven (7) normally open (NO) safety outputs and four (4) normally closed (NC) auxiliary outputs. The operating temperature appropriate for this device should range from -5 degrees Celsius to +55 degrees Celsius, or the equivalent range of 23 to 131 degrees Fahrenheit. The relative humidity rating should be 90 percent.
Question: Does Automation Stop offer repairs on the 440R-G23108?
Answer: Yes. We offer repairs for the 440R-G23108 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-G23108?
Answer: If you buy the 440R-G23108 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-G23108 online?
Answer: Yes. Automation Stop sells the 440R-G23108 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-G23108?
Answer: The 440R-G23108 is made by Allen Bradley - Miscellaneous.
For additional information about 440R-G23108 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-G23108.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-G23108/A | 440R-G23108 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.