GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

700-FEB1TU22

✓ In Stock

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 700-FEB1TU22
Series: Allen Bradley 700

Description:

Part number 700-FEB1TU22 is an Allen Bradley timing relay with one (1) OFF delay timing function. The rated voltage input of this device is 24 volts AC/DC and 110 to 240 volts AC. This product has a power consumption rating of 0.5 watts at 24 volts DC and 9 volt-amperes at 240 volts AC. The physical dimensions of this device measure 80 mm x 70 mm x 17.5 mm. The approximate weight of this Allen Bradley product is 60 grams.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Part number 700-FEB1TU22 is a timing relay that was manufactured by Allen Bradley. The device is part of the Bulletin 700-FE series of timing relays. The 700-FEB1TU22 offers one specific timing function: the OFF delay. The relay input can be 24 volts AC/DC or within the range of 110 to 240 volts AC. The rated power consumption of this device is 0.5 watts at 24 volts DC and 9 volt-amperes at 240 volts AC. This Allen Bradley device has one bi-color light emitting diode (LED) for device status visualization. This product's expected mechanical lifetime is twenty million (20,000,000) operations, and it has an estimated electrical lifetime of four hundred thousand (400,000) operations. This relay is cULus listed and is CE-marked.

The module features 6 timing settings in the range of 0.05 seconds up to 10 hours. The time ranges supported are 0.05 to 1 second, 0.5 to 10 seconds, 0.05 to 1 minute, 0.5 to 10 minutes, 0.05 to 1 hour, and 0.5 to 10 hours. The unit has a setting accuracy of ±5 percent of the full scale.  It has available one (1) normally open (NO) contact output. The switch capacity, according to UL 508 is NEMA D300. This device has a vibration resistance of 4 g in 3 axes at a frequency range of 10 to 500 hertz, as well as a shock resistance of 50 g. This relay has dimensions that measure 80 millimeters x 70 millimeters x 17.5 millimeters and weights approximately 60 grams. This device can be surface mounted at any position or DIN rail mounted.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 700-FEB1TU22?

Answer: Yes. We offer repairs for the 700-FEB1TU22 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-FEB1TU22?

Answer: If you buy the 700-FEB1TU22 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 700-FEB1TU22 online?

Answer: Yes. Automation Stop sells the 700-FEB1TU22 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 700-FEB1TU22?

Answer: The 700-FEB1TU22 is made by Allen Bradley - Miscellaneous.


Series information for 700-FEB1TU22

For additional information about 700-FEB1TU22 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-FEB1TU22.

Revision Part # Also Known As Availability
700-FEB1TU22/A 700-FEB1TU22 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 700-FEBITU22
  • 700-FE81TU22
  • 700-FE8ITU22
  • 70O-FEB1TU22
  • 70O-FEBITU22
  • 70O-FE81TU22
  • 70O-FE8ITU22
  • 7O0-FEB1TU22
  • 7O0-FEBITU22
  • 7O0-FE81TU22
  • 7O0-FE8ITU22
  • 7OO-FEB1TU22
  • 7OO-FEBITU22
  • 7OO-FE81TU22
  • 7OO-FE8ITU22

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP