GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Automation Product |
Part Number: | 74101-169-88 |
Series: | 1336 |
Description:
The 74101-169-88 gate drive board kit is intended for the Allen Bradley 1336 Plus and Plus II AC Drives. It comes as a spare component assembly kit. Included in the board's spare parts kit are the drive board and a few mounting screws. The 74101-169-88 is compatible with G-Frame drives rated at 500 horsepower and 480 volts AC. When changing a power module, it is suggested that the gate drive board be inspected for optimal operation.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen Bradley / Rockwell Automation designed and produced the 74101-169-88, which is a gate drive board. This device serves to be a replacement gate drive board for Allen Bradley G Frame drives 1336 Plus and Plus II. The drive board and a few mounting screws are included in this board's spare part assembly kit, and this Gate Drive Board is backward compatible with the 1336-BDB-SP51A Series A through C gate drive boards and can be used in their place. The 1336 Plus and Plus II adjustable frequency AC drives, which have input ratings of four hundred and sixty (460) volts AC and five hundred (500) horsepower, are compatible with the 74101-169-88 gate drive board. This Allen Bradley gate drive board, like other 1336 replacement components, is field installable and sits alongside the drive's primary control board. Before installing the board, operators must ensure to remove the enclosure and turn off the power, then check the TB1 terminals for zero (0) voltage. Furthermore, remove the drive's primary control board to get to the gate drive board. There is one (1) fan connector, six (6) jumper connectors, such as the J2, J6, and J7, J8 along with the J9, and J10, and one (1) TB6 fan connector on the gate drive board. Disconnect the connections on the board and replace them with a new one. Connect the connections on the replacement board to the primary control board to secure it. It is recommended that the gate driver board be tested for optimal operation when replacing a power module.
Question: Does Automation Stop offer repairs on the 74101-169-88?
Answer: Yes. We offer repairs for the 74101-169-88 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 74101-169-88?
Answer: If you buy the 74101-169-88 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 74101-169-88 online?
Answer: Yes. Automation Stop sells the 74101-169-88 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 74101-169-88?
Answer: The 74101-169-88 is made by Allen Bradley - Drives.
For additional information about 74101-169-88 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 74101-169-88.
Revision Part # | Also Known As | Availability |
---|---|---|
74101-169-88/A | 74101-169-88 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.