1336E-BRF75-AA-EN-HA2-L7E

The 1336E-BRF75-AA-EN-HA2-L7E is an Allen-Bradley 1336 IMPACT series AC drive. The Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E has an input power of 380-480 Volts Alternating Current along with an input power range between 9 and 12 kilovolt-amperes and a total input current rating of 14 amperes. The outputs of the Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E are rated for 7.5 horsepower (HP) which is equivalent to 5.5 kilowatts of power. This 1336 IMPACT drive controller uses three-phase input power to deliver the full-rated power at output. Conversely, a single-phase input delivers a maximum of half the rated power output. This Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E, like the entire IMPACT series, has a tolerance of plus or minus 10% (against the factory rating) that comes with an input frequency of 48 to 62 Hertz. This 1336 IMPACT drive unit is rated for full-power and continuous current at the output as well as 150 percent of the available current at the output for a one minute. The Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E has a user-interface system (HMI) that allows a qualified technician to configure the machine with ease. The user-interface on the 1336 IMPACT fully supports English language options, giving it more flexibility than some other available units. This 1336 IMPACT uses a TTL contact control system that includes encoder feedback. The circuit interfaced with the Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E must be able to work at 10 Milliampere with no risk of eroding the signal. This should be used with a reed-type input device. The Allen-Bradley IMPACT 1336E-BRF75-AA-EN-HA2-L7E also comes with a NEMA type 1 or IP20 enclosure. This enclosure does not protect against oil or water spills and is not recommended for outdoor uses or applications in hazardous environments.