GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1394-SJT22-C-RL |
Series: | Servo Controllers |
Description:
Designed and manufactured by Allen Bradley, part number 1394-SJT22-C-RL is a servo controller that belongs to the Bulletin 1394 product line. The rated input voltage of this device ranges from 324 to 528 volts AC, three-phase at a frequency of 50/60 hertz. The input current of this device is 28.6 amperes. The nominal bus output voltage of this servo controller is 530/680 volts DC. It has an efficiency rating of 98%. The approximate weight of this Allen Bradley servo controller is 12.7 kilograms, or 28.0 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1394-SJT22-C-RL is a servo controller. This device was designed and produced by the company known as Allen Bradley / Rockwell Automation. This device belongs to the Bulletin 1394 series of products. This servo controller has a rated input voltage of 324 to 528 volts alternating current (AC) at a frequency of 50/60 hertz. This product operates in three (3) phases. The alternating current (AC) input current of this device is 28.6 amperes. It has a peak inrush current rated at 697 amperes for less than one (1) microsecond. The line loss ride through time of this servo controller is twenty (20) milliseconds. The nominal bus output voltage of this device is 530/680 volts direct current (DC). It has a continuous power output of 17/22 kilowatts, as well as a peak power output of 136 kilowatts. The continuous current output of this servo controller is 33.8 amperes, while the peak current output is rated as 200 amperes. The Allen Bradley 1394-SJT22-C-RL has a capacitance rating of six hundred and sixty (660) microfarad. Additionally, the inductance rating of this product is five hundred (500) microHenry. The efficiency rating of this Allen Bradley servo controller is ninety-eight percent (98%). This device has a total of 26,000 electronic cam profile points. These are divided up into 13,000 master cam profile points and 13,000 slave cam profile points. This Allen Bradley servo controller is not equipped with an internal shunt resistor. The Allen Bradley 1394-SJT22-C-RL servo controller has an approximate weight of 12.7 kilograms, or the equivalent of 28.0 pounds.
Question: Does Automation Stop offer repairs on the 1394-SJT22-C-RL?
Answer: Yes. We offer repairs for the 1394-SJT22-C-RL and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1394-SJT22-C-RL?
Answer: If you buy the 1394-SJT22-C-RL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1394-SJT22-C-RL online?
Answer: Yes. Automation Stop sells the 1394-SJT22-C-RL online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1394-SJT22-C-RL?
Answer: The 1394-SJT22-C-RL is made by Allen Bradley - Drives.
Question: What type of product is the 1394-SJT22-C-RL?
Answer: The 1394-SJT22-C-RL is part of the Servo Controllers series.
For additional information about 1394-SJT22-C-RL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394-SJT22-C-RL.
Revision Part # | Also Known As | Availability |
---|---|---|
1394-SJT22-C-RL/A | 1394-SJT22-C-RL Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.