GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1397-A015R-HA2-PE |
Series: | 1397 |
Description:
The 1397-A015R-HA2-PE regenerative module is designed and manufactured by Allen-Bradley. This drive consists of an input current of 19 amperes while its supported AC current input spans from 207 volts to 253 volts. In addition to that, this module's minimum required power from the source is at 7.5 kV whereas the max limit of fault is 5000 amperes. Moreover, this device consists of a minimum rated load of 5 percent while also comprising a 150 percent overload capacity (for 1 minute) and 200 percent overload capacity for 13 seconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This Allen-Bradley manufactured device is the 1397-A015R-HA2-PE, which is a regenerative drive with a voltage rating of two hundred and thirty (230) volts alternating current (AC) along with a rated horsepower of fifteen (15) horsepower, or the equivalent o\f eleven (11) kilowatts (kW). This device offers its users essential inbuilt functions that provide security in case of any malfunctions, such as overloading of the motor or BUS voltage disruptions. The input current of this device is nineteen (19) amperes while the alternating current input of this device spans from two hundred and seven (207) volts alternating current to two hundred and fifty-three (253) volts alternating current. Moreover, this device's minimum required power from the source is 7.5 kilovolts. The max limit of fault for this product is five thousand (5000) amperes. The service factor of this Allen-Bradley digital direct current drive is at 1. The minimum rated load is 5 percent along with consisting of a 150 percent overload capacity (for 1 minute) and also a 200 percent overload capacity for 13 seconds. This device offers an intuitive HMI which comes with an LCD display. With this feature, the users find it easy to function the module. In addition to that, this device also supports speed loop auto-tuning. Each member of the bulletin 1397 series render the users with high reliability along with precise handling of various motors and this Allen-Bradley digital drive is no exception. Furthermore, this device was designed to be used up to an altitude of 3300 feet without derating.
Question: Does Automation Stop offer repairs on the 1397-A015R-HA2-PE?
Answer: Yes. We offer repairs for the 1397-A015R-HA2-PE and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1397-A015R-HA2-PE?
Answer: If you buy the 1397-A015R-HA2-PE through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1397-A015R-HA2-PE online?
Answer: Yes. Automation Stop sells the 1397-A015R-HA2-PE online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1397-A015R-HA2-PE?
Answer: The 1397-A015R-HA2-PE is made by Allen Bradley - Drives.
Question: What VAC (voltage alternating current) does the 1397-A015R-HA2-PE have?
Answer: The 1397-A015R-HA2-PE by Allen Bradley - Drives has a voltage alternating current (VAC) of 230.
Question: What horsepower (HP) does the 1397-A015R-HA2-PE have?
Answer: The Allen Bradley - Drives 1397-A015R-HA2-PE includes a horsepower (HP) of 15.
For additional information about 1397-A015R-HA2-PE check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1397-A015R-HA2-PE.
Revision Part # | Also Known As | Availability |
---|---|---|
1397-A015R-HA2-PE/A | 1397-A015R-HA2-PE Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.