GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2071-AP4

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2071-AP4
Series: Kinetix 3

Description:

The Allen-Bradley 2071-AP4 is a Servo Drive. This device supports a single phase with a voltage of 240 Volts AC. The drive delivers an output current of 7.14 Amperes. The unit weighs approximately 980 grams (2.16 pounds) while shipping. The device supports a voltage range from 170 Volts AC to 264 Volts AC at a frequency range from 47 Hertz to 63 Hertz.


Key Features:

  • offers support for rs-232 and rs-485
  • has input voltage of 240v ac

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$656.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 2071-AP4 is a Kinetix 3 Servo Drive. This device supports a single phase with a voltage of 240 Volts AC. The drive delivers an output current of 4.67 Amperes. This device dissipates a power of 400 Watts. The 2071-AP4 supports a voltage range from 170 Volts AC to 264 Volts AC at a frequency range from 47 Hertz to 63 Hertz. The device offers RS-232 and RS-485 communication ports. This servo drive supports an overvoltage of 405 Volts DC and offers a protection short circuit current limit of 100 Kilo-amperes. The 2071-AP4 includes an internal shunt on/off voltage from 380 Volts DC to 390 Volts DC. This device supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 2 Hertz to 2000 Hertz.

The Allen-Bradley 2071-AP4 can be stored in a safe environment that should not be full of condensation or corrosion at a temperature from -10 degrees to 70 degrees Celsius (14 degrees to 158 degrees Fahrenheit). This device can operate at an altitude of up to 300 meters (1000 feet) without deterioration. The 2071-AP4 has an operating specification for the mechanical shock level of 15 g. The unit also has a storage specification for the mechanical shock level of 2.5 g. The device is protected by a Bussman fuse. The servo drive can operate at zero (0) degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial applications. The 2071-AP4 weighs approximately 980 grams (2.16 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series Kinetix 3
Part Number 2071-AP4
Description Single-Phase Servo Drive
Voltage Rating 240 Volts AC
Number of Phases One (1)
Continuous Output Current 7.14 Amperes
Power Dissipation 400 Watts
AC Input Frequency 47…63 Hertz
Overvoltage 405 Volts DC
Short-Circuit Current Rating 100,000 A (rms) symmetrical
Communication Ports RS-232 and RS-485
Weight 980 grams (2.16 pounds)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2071-AP4?

Answer: Yes. We offer repairs for the 2071-AP4 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2071-AP4?

Answer: If you buy the 2071-AP4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2071-AP4 online?

Answer: Yes. Automation Stop sells the 2071-AP4 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2071-AP4?

Answer: The 2071-AP4 is made by Allen Bradley - Drives.


Question: What type of product is the 2071-AP4?

Answer: The 2071-AP4 is part of the Kinetix 3 series.


Question: What is the alternating current (AC) Input Frequency of the 2071-AP4?

Answer: The alternating current (AC) Input Frequency of the 2071-AP4 is 47…63 Hertz.


Question: What Brand is included with the Allen Bradley-Rockwell Automation 2071-AP4?

Answer: The Allen Bradley-Rockwell Automation 2071-AP4 has a Allen Bradley / Rockwell Automation Brand.


Question: What Communication Ports does the Allen Bradley-Rockwell Automation 2071-AP4 have?

Answer: The Communication Ports of the Allen Bradley-Rockwell Automation 2071-AP4 is RS-232 and RS-485.


Question: What is the Continuous Output Current of the 2071-AP4?

Answer: The Continuous Output Current of the 2071-AP4 is 7.14 Amperes.


Question: What Description does the 2071-AP4 have?

Answer: The 2071-AP4 has a Single-Phase Servo Drive Description.


Question: What is the Number of Phases of the Rockwell-Automation 2071-AP4?

Answer: The Rockwell-Automation 2071-AP4 has a Number of Phases of One (1).


Question: What is the Overvoltage of the 2071-AP4?

Answer: The Overvoltage of the 2071-AP4 is 405 Volts direct current.


Question: What is the unit Number of the 2071-AP4?

Answer: The unit Number of the Rockwell-Automation 2071-AP4 is 2071-AP4.


Question: What Power Dissipation does the Allen Bradley Automation 2071-AP4 have?

Answer: The 2071-AP4 has a Power Dissipation of 400 Watts.


Question: What is the Short-Circuit Current Rating of the Rockwell-Automation 2071-AP4?

Answer: The Rockwell-Automation 2071-AP4 has a Short-Circuit Current Rating of 100,000 A (rms) symmetrical.


Question: What Voltage Rating does the Allen Bradley 2071-AP4 have?

Answer: The 2071-AP4 has a Voltage Rating of 240 Volts AC (alternating current).


Question: What is the Weight of the Rockwell Automation 2071-AP4?

Answer: The Weight of the Rockwell Automation 2071-AP4 is 980 grams (2.16 pounds).


Series information for 2071-AP4

For additional information about 2071-AP4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2071-AP4.

Revision Part # Also Known As Availability
2071-AP4/A 2071-AP4 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 207I-AP4
  • 2O71-AP4
  • 2O7I-AP4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP