GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2090-UXNFBHF-S04

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 2090-UXNFBHF-S04
Series: 2090

Description:

The 2090-UXNFBHF-S04 is an Allen Bradley cable. It is a standard, non-flex type for use with motors H & F series for feedback service. It is NFPA-79 compliant with a low capacitance design. The cable is 4 meters long (13.12 feet), has an external diameter 9.6 millimeters (0.36 inches), and a maximum bending radius of 67.2 millimeters (2.6 inches). Industrial TPE material is used for the outer jacket and copper braid with aluminum polyester tape for the shield.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 2090-UXNFBHF-S04 is a cable that was designed and manufactured by Allen Bradley / Rockwell Automation. It belongs to the 2090 series of products, which include single, power, and feedback cables for installation with Allen Bradley’s motors. The 2090-UXNFBHF-S04 cable is designed for applications with industrial motors under the H and F classification. The cable is intended to provide feedback service, most likely to inform about motor speed and position. The cable construction is of standard, non-flex type, which defines its functions for static use. The unit complies with NFPA-79 regulations and possesses a low capacitance design to help maximizing system power density. The device is composed by cable part and end connectors of threaded DIN circular type M5015.

The cable has a total length of 4 meters (13.12 feet). It has an external diameter of 9.6 millimeters (0.36 inches). For maintaining the proper operation of this cable, a cable, that is 7 times larger than the external diameter cable length, next to the connectors should be kept unbent. This area is calculated to be 67.2 millimeters (2.6 inches) and is also equal to the bend radius the cable can accept for reliable service and long life. The device outer jacket is manufactured from Industrial TPE material with superior mechanical and chemical properties and colored in black. The TPE material is famous with its great elasticity capability and ability to revert back to the original position when stress is removed. Below the external jacket, over 100 percent of the cable length there is a cable shield. This shield is manufactured by a tinned copper braid with aluminum/polyester tape and delivers excellent EMC/EMI performance.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2090-UXNFBHF-S04?

Answer: Yes. We offer repairs for the 2090-UXNFBHF-S04 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 2090-UXNFBHF-S04?

Answer: If you buy the 2090-UXNFBHF-S04 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2090-UXNFBHF-S04 online?

Answer: Yes. Automation Stop sells the 2090-UXNFBHF-S04 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2090-UXNFBHF-S04?

Answer: The 2090-UXNFBHF-S04 is made by Allen Bradley - Drives.


Series information for 2090-UXNFBHF-S04

For additional information about 2090-UXNFBHF-S04 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2090-UXNFBHF-S04.

Revision Part # Also Known As Availability
2090-UXNFBHF-S04/A 2090-UXNFBHF-S04 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2090-UXNFBHF-SO4
  • 2090-UXNFBHF-504
  • 2090-UXNFBHF-5O4
  • 2090-UXNF8HF-S04
  • 2090-UXNF8HF-SO4
  • 2090-UXNF8HF-504
  • 2090-UXNF8HF-5O4
  • 209O-UXNFBHF-S04
  • 209O-UXNFBHF-SO4
  • 209O-UXNFBHF-504
  • 209O-UXNFBHF-5O4
  • 209O-UXNF8HF-S04
  • 209O-UXNF8HF-SO4
  • 209O-UXNF8HF-504
  • 209O-UXNF8HF-5O4
  • 2O90-UXNFBHF-S04
  • 2O90-UXNFBHF-SO4
  • 2O90-UXNFBHF-504
  • 2O90-UXNFBHF-5O4
  • 2O90-UXNF8HF-S04
  • 2O90-UXNF8HF-SO4
  • 2O90-UXNF8HF-504
  • 2O90-UXNF8HF-5O4
  • 2O9O-UXNFBHF-S04
  • 2O9O-UXNFBHF-SO4
  • 2O9O-UXNFBHF-504
  • 2O9O-UXNFBHF-5O4
  • 2O9O-UXNF8HF-S04
  • 2O9O-UXNF8HF-SO4
  • 2O9O-UXNF8HF-504
  • 2O9O-UXNF8HF-5O4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP