GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2098-DSD-HV050X-DN |
Series: | Ultra3000-5000 |
UPC: | 662453959412 |
Description:
Part Number 2098-DSD-HV050X-DN,which was manufactured by Allen-Bradley, is a digital servo drive. It is an indexing type of the Ultra 3000 group of drives allowing acceleration and deceleration. It incorporates DeviceNet communication network. It has an input voltage from 230 to 480 volts AC, providing 11 to 22 amperes output. The maximum operation temperature is 55 degrees Celsius (131 degrees Fahrenheit) and its elevation current de-rating starts from 1000 meters with 3% for each additional 300 meters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2098-DSD-HV050X-DN is a digital servo drive that is used for industrial applications. This unit belongs to the Ultra 3000 family with DeviceNet. The servo drive is an indexing type, utilizing pre-configured positions depending on the motion application requirements. Its main application in the industry is to start and stop conveyor belts and comparable machinery. It is a device that uses three phase input voltage, providing output of 2.5 kilowatts at 230 volts and 5.0 kilowatts at 460 volts. It requires an external 12-24 volt power supply for the correct operation of the digital I/O. The drive is rated as a high voltage unit. It provides 11 amperes output current continuously, which can rise to 22 amperes in peak situations. The servo drive operates at elevations up to one thousand (1000) meters without de-rating, and for each additional 300 meters, 3% of the current value should be de-rated.
This product can use the technology of Unconnected Message Manager, UCMM, which allows creating Group 3 explicit message connection, with capacity of establishing up to five (5) connections of that type. The user can configure the drives fault responding, which will allow to have the capability to design the unit actions towards communication failures. If you need cyclic operation like data reporting at exact intervals, you are able to configure the servo drive using its change of state feature. The network data rate can be figured out by its Autobaud function.
Question: Does Automation Stop offer repairs on the 2098-DSD-HV050X-DN?
Answer: Yes. We offer repairs for the 2098-DSD-HV050X-DN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2098-DSD-HV050X-DN?
Answer: If you buy the 2098-DSD-HV050X-DN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2098-DSD-HV050X-DN online?
Answer: Yes. Automation Stop sells the 2098-DSD-HV050X-DN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2098-DSD-HV050X-DN?
Answer: The 2098-DSD-HV050X-DN is made by Allen Bradley - Drives.
Question: What type of product is the 2098-DSD-HV050X-DN?
Answer: The 2098-DSD-HV050X-DN is part of the Ultra3000-5000 series.
Question: What amperage is included with the 2098-DSD-HV050X-DN?
Answer: The 2098-DSD-HV050X-DN includes a amperage of 22.
For additional information about 2098-DSD-HV050X-DN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2098-DSD-HV050X-DN.
Revision Part # | Also Known As | Availability |
---|---|---|
2098-DSD-HV050X-DN/A | 2098-DSD-HV050X-DN Ser A, Series A, Rev A | Request a Quote |
2098-DSD-HV050X-DN/B | 2098-DSD-HV050X-DN Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.