GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20D-STEG-B1

✓ In Stock

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20D-STEG-B1
Series: 20D

Description:

The 20D-STEG-B1 is a high-resolution encoder board that was produced by Allen-Bradley. It is used with PowerFlex 700 drives, providing speed regulation of 0.001 percent over the speed range 120:1. The power supply inputs a voltage of 11.5 volts DC at 130 milliamperes. The feedback type is Sine/Cosine 1V P-P Offset 2.5. The torque regulation value is 2500 radians per second and maximum speed is 12.5 microseconds. Shortly after power-up, the encoder can collect information through the RS-485 port.


Key Features:

  • has 0 to 50 degrees celsius (32 to 122 degrees fahrenheit operating temperature

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 20D-STEG-B1 is an encoder board that was manufactured by Allen-Bradley. This model is of high resolution, and it is to be use with Allen-Bradley’s PowerFlex 700 series of adjustable frequency drives. The board allows for speed regulation of 0.001 percent across 120:1 speed range. The speed control is rated at a 120:1 operating range. When used with drive frames 1-6, the bandwidth is seven hundred and forty-four (744) radians per second and for drives with frames 9 and up, the bandwidth is three hundred (300) radians per second. The drive torque regulation is 2500 radians per second. The unit’s voltage supply is 11.5 volts DC (direct current) at 130 milliamperes. Its high-resolution feedback is of type Sine/Cosine 1V P-P Offset 2.5.

Compared to the other available feedback options to use, the 20D-STEG-B1 provides the best optimization of speed, accuracy, and position regulation. In order to be able to install the encoder board, there is the need of an additional unit: an expansion cassette that will allow the installation in the drive unit. When this board is mounted, the drive maintains its CE certification, opposite to the resolver board, where the CE certification is lost. The maximum connection cable length is ninety (90) meters (295 feet). The encoder's maximum frequency speed is 12.5 microseconds. With its high-resolution option, the board can obtain the information via the RS-485 interface. This is performed shortly after power-up and includes address, command number, mode, number of turns, number of Sine/Cos cycles and CheckSum.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20D-STEG-B1?

Answer: Yes. We offer repairs for the 20D-STEG-B1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20D-STEG-B1?

Answer: If you buy the 20D-STEG-B1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20D-STEG-B1 online?

Answer: Yes. Automation Stop sells the 20D-STEG-B1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20D-STEG-B1?

Answer: The 20D-STEG-B1 is made by Allen Bradley - Drives.


Series information for 20D-STEG-B1

For additional information about 20D-STEG-B1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20D-STEG-B1.

Revision Part # Also Known As Availability
20D-STEG-B1/A 20D-STEG-B1 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20D-STEG-BI
  • 20D-STEG-81
  • 20D-STEG-8I
  • 20D-STE6-B1
  • 20D-STE6-BI
  • 20D-STE6-81
  • 20D-STE6-8I
  • 20D-5TEG-B1
  • 20D-5TEG-BI
  • 20D-5TEG-81
  • 20D-5TEG-8I
  • 20D-5TE6-B1
  • 20D-5TE6-BI
  • 20D-5TE6-81
  • 20D-5TE6-8I
  • 2OD-STEG-B1
  • 2OD-STEG-BI
  • 2OD-STEG-81
  • 2OD-STEG-8I
  • 2OD-STE6-B1
  • 2OD-STE6-BI
  • 2OD-STE6-81
  • 2OD-STE6-8I
  • 2OD-5TEG-B1
  • 2OD-5TEG-BI
  • 2OD-5TEG-81
  • 2OD-5TEG-8I
  • 2OD-5TE6-B1
  • 2OD-5TE6-BI
  • 2OD-5TE6-81
  • 2OD-5TE6-8I

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP