GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20DD034A3EYNANGNL

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20DD034A3EYNANGNL
Series: PowerFlex 700S

Description:

20DD034A3EYNANGNL is a product that was manufactured by the Allen-Bradley company. This product is classified as an adjustable frequency AC drive. It has a voltage of 480 (four hundred and eighty) volts alternating current (AC) and has three (3) phases of six (6) pulses each. At 480 volts input, this device produces thirty-four (34) amperes, which is equal to twenty-five (2%) Hp (horsepower) The enclosure on this device is an IP20, NEMA Type 1 with a conformal coat. This device is equipped with a brake IGBT. The primary operator interface of this device is a full numeric keypad that also has a liquid crystal display (LCD).


Key Features:

  • comes with heat sink thermistor that is monitored by microprocessor overtemp trip
  • has a full numeric lcd human interface
  • comes with logic control ride thru of 0.25 seconds with the drive not running
  • comes with power ride thru of 15 milliseconds at full load
  • comes with CE filter
  • comes with CM choke
  • provides 25 horsepower
  • 3 ph
  • equipped with resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This adjustable frequency AC drive, which was designed, and even manufactured, by the Allen-Bradley company, has the part number of 20DD034A3EYNANGNL. This particular AC drive is categorized within the PowerFlex 700S family of AC drives. For high demand applications and tasks, this device has many features to help complete whatever needs to be done. By combining multiple features of the PowerFlex family of AC Drives, such as their impressive performance and flexible controls, the Allen-Bradley 20DD034A3EYNANGNL can create solutions that are not only cost effective but also highly functional. This product utilizes parts that have shown to reduce noise, thus making the entire system quieter. If wiring needs to be fixed or if the machine needs to be disconnected, the control terminal blocks can be safely and easily pulled apart. For applications that involve indexing and electronic line shaft, just to name a couple, there is a position loop integrated within the product.  

20DD034A3EYNANGNL has many technical and physical specifications associated with it. The voltage of this product is 480 volts AC (alternating current). Additionally, this product has three (3) phases, with six (6) pulses for each phase. This product, when at 480 volts input, is able to produce thirty-four (34) amps, or twenty-five (25) horsepower equivalently. The 20DD034A3EYNANGNL has an IP20, NEMA Type 1 enclosure with a conformal coating. This product is equipped with an operator terminal that comprises a full numeric keypad and a liquid crystal display (LCD). There is a brake IGBT equipped with this device. The 20DD034A3EYNANGNL has a standard incremental encoder for device feedback.

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 700S Drives with Phase II Control
Voltage 480V AC
Ph 3
Precharge -
Amps 34
Hp 25
Frame 2
Enclosure IP20, NEMA Type 1 with Conformal Coat
Operator Interface Full Numeric LCD
Documentation English Manual
w/Brake IGBT Yes
w/Resistor No
CE Filter Yes
CM Choke Yes
du/dt Filter No
Version None
Logix Expansion N/A
SynchLink No
Cassette Slim
Feedback Option Standard (Incremental Encoder)
Additional Configuration Phase II DriveLogix 5730 w/EtherNet/IP
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20DD034A3EYNANGNL?

Answer: Yes. We offer repairs for the 20DD034A3EYNANGNL and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20DD034A3EYNANGNL?

Answer: If you buy the 20DD034A3EYNANGNL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20DD034A3EYNANGNL online?

Answer: Yes. Automation Stop sells the 20DD034A3EYNANGNL online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20DD034A3EYNANGNL?

Answer: The 20DD034A3EYNANGNL is made by Allen Bradley - Drives.


Question: What type of product is the 20DD034A3EYNANGNL?

Answer: The 20DD034A3EYNANGNL is part of the PowerFlex 700S series.


Question: What Additional Configuration does the 20DD034A3EYNANGNL have?

Answer: The Additional Configuration of the Allen-Bradley 20DD034A3EYNANGNL is Phase II DriveLogix 5730 w/EtherNet/IP.


Question: What amperes does the 20DD034A3EYNANGNL have?

Answer: The 20DD034A3EYNANGNL has a amperes of 34.


Question: What Cassette does the Allen Bradley 20DD034A3EYNANGNL have?

Answer: The Allen Bradley 20DD034A3EYNANGNL has a Slim Cassette.


Question: Does the Rockwell Automation 20DD034A3EYNANGNL have a CE Filter?

Answer: Yes.


Question: Does the Rockwell-Automation 20DD034A3EYNANGNL have a CM Choke?

Answer: Yes.


Question: What Documentation does the 20DD034A3EYNANGNL have?

Answer: The Allen-Bradley 20DD034A3EYNANGNL has a English Manual Documentation.


Question: Does the Allen Bradley 20DD034A3EYNANGNL have a du/dt Filter?

Answer: No.


Question: What is the Enclosure of the Allen Bradley 20DD034A3EYNANGNL?

Answer: The Enclosure of the 20DD034A3EYNANGNL is IP20, NEMA Type 1 with Conformal Coat.


Question: What Feedback Option does the Allen Bradley/Rockwell Automation 20DD034A3EYNANGNL have?

Answer: The Allen Bradley/Rockwell Automation 20DD034A3EYNANGNL has a Standard (Incremental Encoder) Feedback Option.


Question: What Frame does the 20DD034A3EYNANGNL have?

Answer: The 20DD034A3EYNANGNL has a Frame of 2.


Question: What is the Hp of the 20DD034A3EYNANGNL?

Answer: The Hp of the 20DD034A3EYNANGNL is 25.


Question: What Logix Expansion does the Allen Bradley Automation 20DD034A3EYNANGNL have?

Answer: The 20DD034A3EYNANGNL has a N/A Logix Expansion.


Question: What operator interface component is included with the 20DD034A3EYNANGNL?

Answer: The 20DD034A3EYNANGNL has a Full Numeric LCD operator interface component.


Question: What Ph does the 20DD034A3EYNANGNL have?

Answer: The Ph of the Allen Bradley/Rockwell Automation 20DD034A3EYNANGNL is 3.


Question: What Precharge is included with the Allen Bradley-Rockwell Automation 20DD034A3EYNANGNL?

Answer: The 20DD034A3EYNANGNL has a - Precharge.


Question: Does the Allen-Bradley 20DD034A3EYNANGNL have a SynchLink?

Answer: No.


Question: Does the Allen Bradley/Rockwell Automation 20DD034A3EYNANGNL have a Version?

Answer: None.


Question: What is the Voltage of the Allen Bradley Automation 20DD034A3EYNANGNL?

Answer: The Allen Bradley Automation 20DD034A3EYNANGNL has a Voltage of 480 volts alternating current (AC).


Series information for 20DD034A3EYNANGNL

For additional information about 20DD034A3EYNANGNL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20DD034A3EYNANGNL.

Revision Part # Also Known As Availability
20DD034A3EYNANGNL/A 20DD034A3EYNANGNL Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20DD034A3EYNAN6NL
  • 20DDO34A3EYNANGNL
  • 20DDO34A3EYNAN6NL
  • 2ODD034A3EYNANGNL
  • 2ODD034A3EYNAN6NL
  • 2ODDO34A3EYNANGNL
  • 2ODDO34A3EYNAN6NL

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP