GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20DD040A3EYNANNNB

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20DD040A3EYNANNNB
Series: PowerFlex 700S

Description:

Part number 20DD040A3EYNANNNB is an Allen-Bradley AC Drive. This particular AC drive belongs to the PowerFlex 700S family of Allen-Bradley products. Four hundred and eighty volts (480V) is the voltage of this device. There are also three (3) phases of six (6) pulses. This device, at 480V input, produces 40 amperes, or the equivalent of 30 horsepower. The operator interface of this device is an LCD display and a keypad that is fully numeric. Feedback is given using a standard incremental encoder.


Key Features:

  • has adjustable bus undervoltage trip
  • comes with a heat sink thermistor that is monitored by microprocessor overtemp trip
  • utilizes a full numeric lcd human interface
  • comes with a logic control ride thru of 0.25 seconds with the drive not running
  • comes with a power ride thru of 15 milliseconds at full load
  • equipped with CE filter
  • equipped with CM choke
  • has horsepower of 30
  • comes with resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 20DD040A3EYNANNNB belongs to the PowerFlex 700S AC drive product line by Allen-Bradley. This product takes advantage of the PowerFlex drives to offer many benefits to the user. By offering high-performance drive control, built-in drive control, and advanced programming features, the Allen-Bradley 20DD040A3EYNANNNB is able to complete any task, no matter how demanding it may be. Additionally, this device is able to produce highly functional and cost-effective solutions by combining and using the powerful performances and flexible control of the various PowerFlex AC drives. Other features of the Allen-Bradley 20DD040A3EYNANNNB include noise reduction parts, as well as terminal blocks that may be separated for disconnect and wiring needs.

The Allen-Bradley 20DD040A3EYNANNNB has many physical and technical specifications that should be discussed. This device's voltage is four hundred and eighty volts (480V) alternating current, or AC abbreviated. With regards to this product's rated voltage, there are three (3) phases and each of these phases has pulses of six (6). This device produces 40 amps, or 30 horsepower, at 480 volts input. This Allen-Bradley product's enclosure is an IP20, NEMA Type 1, and it has a conformal coating. A full numeric keypad with an LCD (liquid crystal display) screen is this device's primary operator interface. The brake that is equipped with this product is a brake IGBT. To help with the problem of emissions, there is a CE Filter and a CM Choke equipped with the device. To give feedback to the operator, the Allen-Bradley 20DD040A3EYNANNNB is equipped with an incremental encoder. 

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 700S Drives with Phase II Control
Voltage 480V AC
Ph 3
Precharge -
Amps 40
Hp 30
Frame 3
Enclosure IP20, NEMA Type 1 with Conformal Coat
Operator Interface Full Numeric LCD
Documentation English Manual
w/Brake IGBT Yes
w/Resistor No
CE Filter Yes
CM Choke Yes
du/dt Filter No
Version None
Logix Expansion N/A
SynchLink Standard
Cassette None
Feedback Option Standard (Incremental Encoder)
Additional Configuration Phase I DriveLogix5720 w/ Expanded Memory
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 20DD040A3EYNANNNB?

Answer: Yes. We offer repairs for the 20DD040A3EYNANNNB and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20DD040A3EYNANNNB?

Answer: If you buy the 20DD040A3EYNANNNB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20DD040A3EYNANNNB online?

Answer: Yes. Automation Stop sells the 20DD040A3EYNANNNB online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20DD040A3EYNANNNB?

Answer: The 20DD040A3EYNANNNB is made by Allen Bradley - Drives.


Question: What type of product is the 20DD040A3EYNANNNB?

Answer: The 20DD040A3EYNANNNB is part of the PowerFlex 700S series.


Question: What Additional Configuration does the Allen Bradley-Rockwell Automation 20DD040A3EYNANNNB have?

Answer: The Allen Bradley-Rockwell Automation 20DD040A3EYNANNNB has a Additional Configuration of Phase I DriveLogix5720 w/ Expanded random-access memory (RAM).


Question: What is the amperes of the 20DD040A3EYNANNNB?

Answer: The amperes of the Allen Bradley-Rockwell Automation 20DD040A3EYNANNNB is 40.


Question: Does the Allen Bradley 20DD040A3EYNANNNB have a Cassette?

Answer: None.


Question: Does the Allen Bradley/Rockwell Automation 20DD040A3EYNANNNB have a CE Filter?

Answer: Yes.


Question: Does the 20DD040A3EYNANNNB have a CM Choke?

Answer: Yes.


Question: What Documentation is included with the Allen-Bradley 20DD040A3EYNANNNB?

Answer: The 20DD040A3EYNANNNB has a English Manual Documentation.


Question: Does the 20DD040A3EYNANNNB have a du/dt Filter?

Answer: No.


Question: What Enclosure does the 20DD040A3EYNANNNB have?

Answer: The Allen Bradley-Rockwell Automation 20DD040A3EYNANNNB has a Enclosure of IP20, NEMA Type 1 with Conformal Coat.


Question: What Feedback Option is included with the Allen-Bradley 20DD040A3EYNANNNB?

Answer: The Allen-Bradley 20DD040A3EYNANNNB has a Standard (Incremental Encoder) Feedback Option.


Question: What is the Frame of the Rockwell Automation 20DD040A3EYNANNNB?

Answer: The Frame of the Rockwell Automation 20DD040A3EYNANNNB is 3.


Question: What Hp does the 20DD040A3EYNANNNB have?

Answer: The Hp of the 20DD040A3EYNANNNB is 30.


Question: What Logix Expansion does the 20DD040A3EYNANNNB have?

Answer: The 20DD040A3EYNANNNB has a N/A Logix Expansion.


Question: What operator interface does the 20DD040A3EYNANNNB have?

Answer: The 20DD040A3EYNANNNB has a Full Numeric LCD operator interface unit.


Question: What is the Ph of the Allen Bradley/Rockwell Automation 20DD040A3EYNANNNB?

Answer: The Ph of the 20DD040A3EYNANNNB is 3.


Question: What Precharge is included with the 20DD040A3EYNANNNB?

Answer: The 20DD040A3EYNANNNB has a - Precharge.


Question: What SynchLink does the Allen Bradley Automation 20DD040A3EYNANNNB have?

Answer: The 20DD040A3EYNANNNB has a Standard SynchLink.


Question: Does the 20DD040A3EYNANNNB have a Version?

Answer: None.


Question: What Voltage does the 20DD040A3EYNANNNB have?

Answer: The Rockwell-Automation 20DD040A3EYNANNNB has a Voltage of 480 volts AC (alternating current).


Series information for 20DD040A3EYNANNNB

For additional information about 20DD040A3EYNANNNB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20DD040A3EYNANNNB.

Revision Part # Also Known As Availability
20DD040A3EYNANNNB/A 20DD040A3EYNANNNB Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20DD040A3EYNANNN8
  • 20DD04OA3EYNANNNB
  • 20DD04OA3EYNANNN8
  • 20DDO40A3EYNANNNB
  • 20DDO40A3EYNANNN8
  • 20DDO4OA3EYNANNNB
  • 20DDO4OA3EYNANNN8
  • 2ODD040A3EYNANNNB
  • 2ODD040A3EYNANNN8
  • 2ODD04OA3EYNANNNB
  • 2ODD04OA3EYNANNN8
  • 2ODDO40A3EYNANNNB
  • 2ODDO40A3EYNANNN8
  • 2ODDO4OA3EYNANNNB
  • 2ODDO4OA3EYNANNN8

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP