GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AB-C2C-11 |
Series: | 1326AB |
Description:
Allen Bradley designed and produced the 1326AB-C2C-11 PM type servo motor. This servo motor has a rated speed of 2000 revolutions per minute (rpm). This servo motor has an IP rating of IP65. The motor stack length of this device is 2. The frame diameter for this Allen Bradley servo motor is 7.63 inches. The approximate weight of this product is 46.3 kilograms. This servo motor has a face/flange mounting option.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1326AB-C2C-11 servo motor is a component of the Allen Bradley 1326AB motor series. This servo motor is a three-phase, brushless alternating current (AC) synchronous motor with high performance, and it satisfies all essential requirements and provides a wide range of capabilities that enhance the overall system in which it is installed. Furthermore, the 1326AB product series' motors' specification list is inclusive of the TENV construction and a vertical mounting along with military rated connectors (MIL specifications) and a cost-effective performance due to ferrite magnets as well as an IP65 protection rating if the motor is used with an optional shaft seal and lastly, environmentally sealed power and feedback cables. Additionally, this module has a frame diameter of 7.63 inches and a motor stack length of two (2). Since this servo motor operates differently than conventional motors, it is classified as a special order component. In addition to everything stated above, the Allen Bradley 1326AB-C2C-11 servo motor features a TENV architecture and a face/flange mounting option with a keyway. Additionally, this Allen Bradley servo motor is UL listed. However, operators must take note of the fact that this protection grade is only available when the motor is used with the shaft seal option, which provides protection against dust and water jets. Position, commutation, and velocity feedback are provided by the brushless resolver in the 1326AB servo motors. The lack of onboard electronics extends the motor's life in harsh environments. This servo motor has a weight of approximately 46.3 kilograms (kg).
Question: Does Automation Stop offer repairs on the 1326AB-C2C-11?
Answer: Yes. We offer repairs for the 1326AB-C2C-11 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-C2C-11?
Answer: If you buy the 1326AB-C2C-11 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AB-C2C-11 online?
Answer: Yes. Automation Stop sells the 1326AB-C2C-11 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AB-C2C-11?
Answer: The 1326AB-C2C-11 is made by Allen Bradley - Motors.
For additional information about 1326AB-C2C-11 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-C2C-11.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AB-C2C-11/A | 1326AB-C2C-11 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.