GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4560F-SJ22AA |
Series: | MPL Servo Motors |
Description:
Part number MPL-B4560F-SJ22AA is a product of Allen Bradley / Rockwell Automation. This device is classified as a permanent magnet rotary servo motor. This device has a rated voltage of 400 volts AC. The rated speed of this device is 3000 rpm. It has a frame size of 130 millimeters, as well as a magnetic stack length that measures 6 inches. This servo motor has an operating temperature that should remain within a range of 0 to 40 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-B4560F-SJ22AA was designed and produced by Allen Bradley / Rockwell Automation as a permanent magnet rotary servo motor. A servo motor's job is to transform the controller's control signal into the rotational angular displacement or angular velocity of the motor output shaft. This module has a rated voltage of four hundred (400) volts alternating current (AC). Aside from that, this Allen Bradley module also has a speed rated at 3000 revolutions per minute (rpm). The frame size of this servo motor is 130 millimeters. Furthermore, this unit also has a magnetic stack length that measures six (6) inches. Another addition to this unit by Allen Bradley is its IEC metric mounting flange. In addition to that, the connectors included with the MPL-B4560F-SJ22AA are circular bayonets and they are facing the shaft. Allen Bradley has designed this module to feature its very own mounting pilot that helps by assisting operators in properly aligning the motor. In order to improve electromagnetic compatibility for this Allen Bradley module, as well as the safety in all of its activities, operators must make sure that the Allen Bradley unit has been grounded in an appropriate manner. The Allen Bradley MPL-B4560F-SJ22AA servo motor has an operating temperature that should remain within a range of 0 to 40 degrees Celsius, or the equivalent range of 32 to 104 degrees Fahrenheit. Additionally, when storing this device, the temperature of the surrounding area should range from -30 degrees Celsius to 70 degrees Celsius, or -22 to 158 degrees Fahrenheit. The atmosphere of the storage area should be noncorrosive.
MPN | MPL-B4560F-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 6 in |
Rated Speed | 3000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4560F-SJ22AA?
Answer: Yes. We offer repairs for the MPL-B4560F-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4560F-SJ22AA?
Answer: If you buy the MPL-B4560F-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4560F-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B4560F-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4560F-SJ22AA?
Answer: The MPL-B4560F-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4560F-SJ22AA?
Answer: The MPL-B4560F-SJ22AA is part of the MPL Servo Motors series.
Question: Does the MPL-B4560F-SJ22AA have a Brake?
Answer: No brake.
Question: What kind of Connectors does the Allen Bradley-Rockwell Automation MPL-B4560F-SJ22AA have?
Answer: The MPL-B4560F-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the MPL-B4560F-SJ22AA have?
Answer: The MPL-B4560F-SJ22AA has Factory Designated Options Standard.
Question: What Feeback is included with the Allen-Bradley MPL-B4560F-SJ22AA?
Answer: The MPL-B4560F-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B4560F-SJ22AA?
Answer: The Frame Size of the Allen Bradley Automation MPL-B4560F-SJ22AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B4560F-SJ22AA?
Answer: The MPL-B4560F-SJ22AA has a Magnetic Stack Length of 6 in.
Question: What Mounting Flange is included with the Rockwell Automation MPL-B4560F-SJ22AA?
Answer: The Rockwell Automation MPL-B4560F-SJ22AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B4560F-SJ22AA?
Answer: The MPL-B4560F-SJ22AA has a Rated Speed of 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Rockwell-Automation MPL-B4560F-SJ22AA?
Answer: The Rockwell-Automation MPL-B4560F-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4560F-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4560F-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4560F-SJ22AA/A | MPL-B4560F-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.