GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1153E-MJ74AA |
Series: | MPM Servo Motors |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, part number MPM-B1153E-MJ74AA is a medium inertia servo motor. this is a 400-volt servo motor that has a frame size of 115 millimeters. This motor has a magnetic stack length of 3 stacks. The base speed of this servo motor is rated at 2250 revolutions per minute (rpm). This servo motor is equipped with a high-resolution encoder that has a multi-turn design, as well as a 24-volt DC brake.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPM-B1153E-MJ74AA is a servo motor that was designed and produced by Allen-Bradley. This compact brushless motor is included in the MP series and is a medium inertia unit. It features a rotor that is capable of handling high inertial loads than the MP-L series of drives. This drive has a voltage class of 400 volts. It is capable of operating at a base speed of up to 2250 revolutions per minute (rpm). The motor receives feedback from a built-in high-resolution encoder that has a multi-turn design. The motor is enclosed in a housing that has an ingress protection rating of IP65. The enclosure is dust tight and can withstand being subjected to water. An optional shaft seal kit can also be installed in order to achieve IP67 standards of protection, allowing the enclosure to also able to protect the motor from temporary immersion. This level of protection is roughly equivalent to NEMA Type 4 protection standards of being water-tight and dust tight. This motor includes a built-in brake that operates at 24 volts DC. The installed brake is a holding brake and is not intended to bring the shaft to a halt or to act as a safety device. This motor is rated for a radial load of 70 kilograms (154 pounds) with an axial load of up to 24 kilograms (53 pounds) at 2000 rpm. The motor features right angled circular connectors that can be rotated up to 180 degrees. The mounting flange is designed according to IEC metric and the motor has a frame size of 115 millimeters.
MPN | MPM-B1153E-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 115 mm |
Magnet Stacks | 3 stacks |
Base Speed | 2250 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1153E-MJ74AA?
Answer: Yes. We offer repairs for the MPM-B1153E-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1153E-MJ74AA?
Answer: If you buy the MPM-B1153E-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1153E-MJ74AA online?
Answer: Yes. Automation Stop sells the MPM-B1153E-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1153E-MJ74AA?
Answer: The MPM-B1153E-MJ74AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1153E-MJ74AA?
Answer: The MPM-B1153E-MJ74AA is part of the MPM Servo Motors series.
Question: What Base Speed does the MPM-B1153E-MJ74AA have?
Answer: The Base Speed of the Rockwell-Automation MPM-B1153E-MJ74AA is 2250 revolutions per minute (RPM).
Question: What Brake does the Rockwell-Automation MPM-B1153E-MJ74AA have?
Answer: The MPM-B1153E-MJ74AA has a Brake of 24 volts direct current brake.
Question: What is the Connectors of the Rockwell Automation MPM-B1153E-MJ74AA?
Answer: The Rockwell Automation MPM-B1153E-MJ74AA has a Connectors of Circluar, right angle, 180 degree rotatable.
Question: What Enclosure/Shaft Key/Shaft Seal does the MPM-B1153E-MJ74AA have?
Answer: The MPM-B1153E-MJ74AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.
Question: What kind of Factory Designated Options does the Allen Bradley Automation MPM-B1153E-MJ74AA have?
Answer: The Allen Bradley Automation MPM-B1153E-MJ74AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the Allen Bradley-Rockwell Automation MPM-B1153E-MJ74AA?
Answer: The MPM-B1153E-MJ74AA has a Multi-turn high-resolution encoder Feedback.
Question: What Frame Size-Bolt Circle Diameter does the MPM-B1153E-MJ74AA have?
Answer: The Rockwell Automation MPM-B1153E-MJ74AA has a Frame Size-Bolt Circle Diameter of 115 mm.
Question: What is the Magnet Stacks of the Allen-Bradley MPM-B1153E-MJ74AA?
Answer: The Allen-Bradley MPM-B1153E-MJ74AA has a Magnet Stacks of 3 stacks.
Question: What Mounting Flange is included with the MPM-B1153E-MJ74AA?
Answer: The MPM-B1153E-MJ74AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Allen Bradley MPM-B1153E-MJ74AA?
Answer: The Voltage Class of the Allen Bradley MPM-B1153E-MJ74AA is 400V.
For additional information about MPM-B1153E-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1153E-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1153E-MJ74AA/A | MPM-B1153E-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.