GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-OV2E

✓ In Stock

1734-OV2E Image 1 thumbnail
1734-OV2E Image 2 thumbnail
1734-OV2E Image 3 thumbnail
1734-OV2E Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-OV2E
Series: Point I/O 1734

Description:

The 1734-OV2E by Allen-Bradley and Rockwell Automation is a POINT I/O Protected Sink Output Module. It has one group of two non-isolated, sinking outputs and a minimum on-state voltage of 10 Volts DC. This hardware has an output current rating of 1.0 Amp per output, 2.0 Amps maximum per module.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1734-OV2E is a POINT I/O Protected Sink Output Module by Allen-Bradley and Rockwell Automation. It has a minimum on-state voltage of 10 Volts DC and one group of two non-isolated, sinking outputs. Additional specifications for the 1734-OV2E include a nominal on-state voltage of 24 Volts DC and a maximum on-state voltage of 28.8 Volts DC. This device has a maximum on-state voltage drop of 0.7 Volts DC and a minimum on-state current of 1.0 milliAmps per channel. The 1734-OV2E has a maximum on-state current of 1.0 Amp per channel and a maximum off-state voltage of 28.8 Volts DC. Off-state leakage (maximum) is 0.5 milliAmps, while output current rating is 1.0 Amp per output, 2.0 Amps maximum per module. The 1734-OV2E comes standard with two indicators for output status (yellow), two for output fault (red), and two for module/network status (green/red). It has a maximum POINTBus current of 75 milliAmps at 5 Volts DC and a maximum power dissipation of 0.8 Watts at 28.8 Volts DC; maximum thermal dissipation is 2.7 British Thermal Units (BTU) per hour at 28.8 Volts DC. This hardware has an isolation voltage of 240 Volts with basic insulation type. The 1734-OV2E has dimensions of 56 x 12 x 75.5 millimeters, or 2.21 x 0.47 x 2.97 inches. It weighs approximately 32.60 grams, or 1.15 ounces.

Environmental specifications for the 1734-OV2E include an operating temperature range between -20 and 55 degrees Celsius and a storage temperature between -40 and 85 degrees Celsius. Relative humidity is rated between 5% and 95% (non-condensing). Vibration is 5 g at 10…500 Hertz and is compliant with IEC 60068-2-6. Operating shock is 30 g while nonoperating shock is 50 g, both compliant with IEC 60068-2-27. Emissions is compliant with IEC 61000-6-4 and ESD immunity is compliant with IEC 6100-4-2.

Technical Specifications

Manufacturer: Allen-Bradley / Rockwell Automation
Outputs: 1 Group of 2 Non-Isolated, Sinking
Minimum On-State Voltage: 10 Volts DC
Nominal On-State Voltage: 24 Volts DC
Maximum On-State Voltage: 28.8 Volts DC
Maximum On-State Voltage Drop: 0.7 Volts DC
Minimum On-State Current: 1.0 milliAmps per Channel
Maximum On-State Current: 1.0 Amp per Channel
Maximum Off-State Voltage: 28.8 Volts DC
Off-State Leakage (Maximum): 0.5 milliAmps
Output Current Rating: 1.0 Amp per Output, 2.0 Amps Maximum Per Module
Maximum POINTBus Current: 75 milliAmps at 5 Volts DC
Maximum Power Dissipation: 0.8 Watts at 28.8 Volts DC
Isolation Voltage: 240 Volts, Basic Insulation Type
Dimensions: 56 x 12 x 75.5 millimeters (2.21 x 0.47 x 2.97 inches)
Weight (Approx.): 32.60 grams (1.15 ounces)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-OV2E?

Answer: Yes. We offer repairs for the 1734-OV2E and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-OV2E?

Answer: If you buy the 1734-OV2E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-OV2E online?

Answer: Yes. Automation Stop sells the 1734-OV2E online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-OV2E?

Answer: The 1734-OV2E is made by Allen Bradley - PLC.


Question: What type of product is the 1734-OV2E?

Answer: The 1734-OV2E is part of the Point I/O 1734 series.


Question: What is the Dimensions: of the Rockwell Automation 1734-OV2E?

Answer: The Rockwell Automation 1734-OV2E has a Dimensions: of 56 x 12 x 75.5 millimeters (2.21 x 0.47 x 2.97 (in)).


Question: What is the Isolation Voltage: of the 1734-OV2E?

Answer: The Allen Bradley/Rockwell Automation 1734-OV2E has a Isolation Voltage: of 240 Volts, Basic Insulation Type.


Question: What Manufacturer: is included with the Allen Bradley/Rockwell Automation 1734-OV2E?

Answer: The Allen Bradley/Rockwell Automation 1734-OV2E has a Allen Bradley (AB) / Rockwell Automation Manufacturer:.


Question: What is the Maximum Off-State Voltage: of the 1734-OV2E?

Answer: The Rockwell Automation 1734-OV2E has a Maximum Off-State Voltage: of 28.8 Volts DC.


Question: What is the Maximum On-State Current: of the 1734-OV2E?

Answer: The Maximum On-State Current: of the Allen Bradley-Rockwell Automation 1734-OV2E is 1.0 Amp per Channel.


Question: What Maximum On-State Voltage Drop: does the Allen Bradley 1734-OV2E have?

Answer: The Allen Bradley 1734-OV2E has a Maximum On-State Voltage Drop: of 0.7 Volts direct current (DC).


Question: What is the Maximum On-State Voltage: of the 1734-OV2E?

Answer: The Allen-Bradley 1734-OV2E has a Maximum On-State Voltage: of 28.8 Volts direct current (DC).


Question: What is the Maximum POINTBus Current: of the Allen Bradley/Rockwell Automation 1734-OV2E?

Answer: The 1734-OV2E has a Maximum POINTBus Current: of 75 milliAmps at 5 Volts DC (direct current).


Question: What is the Maximum Power Dissipation: of the 1734-OV2E?

Answer: The Maximum Power Dissipation: of the 1734-OV2E is 0.8 Watts at 28.8 Volts direct current (DC).


Question: What Minimum On-State Current: does the Allen Bradley/Rockwell Automation 1734-OV2E have?

Answer: The Allen Bradley/Rockwell Automation 1734-OV2E has a Minimum On-State Current: of 1.0 milliAmps per Channel.


Question: What Minimum On-State Voltage: does the 1734-OV2E have?

Answer: The Allen Bradley/Rockwell Automation 1734-OV2E has a Minimum On-State Voltage: of 10 Volts DC.


Question: What is the Nominal On-State Voltage: of the 1734-OV2E?

Answer: The Nominal On-State Voltage: of the Allen Bradley/Rockwell Automation 1734-OV2E is 24 Volts DC (direct current).


Question: What is the Off-State Leakage (Maximum): of the Allen Bradley-Rockwell Automation 1734-OV2E?

Answer: The Off-State Leakage (Maximum): of the Allen Bradley-Rockwell Automation 1734-OV2E is 0.5 milliAmps.


Question: What is the Output Current Rating: of the 1734-OV2E?

Answer: The Output Current Rating: of the 1734-OV2E is 1.0 Amp per Output, 2.0 amperes Maximum Per Module.


Question: Does the 1734-OV2E have a Outputs:?

Answer: 1 Group of 2 Non-Isolated, Sinking.


Question: What is the Weight (Approx.): of the 1734-OV2E?

Answer: The Allen Bradley-Rockwell Automation 1734-OV2E has a Weight (Approx.): of 32.60 grams (1.15 ounces).


Series information for 1734-OV2E

For additional information about 1734-OV2E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-OV2E.

Revision Part # Also Known As Availability
1734-OV2E/A 1734-OV2E Ser A, Series A, Rev A Request a Quote
1734-OV2E/B 1734-OV2E Ser B, Series B, Rev B Request a Quote
1734-OV2E/C 1734-OV2E Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1734-0V2E
  • I734-OV2E
  • I734-0V2E

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP