GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-OX2 |
Series: | Point I/O 1734 |
Description:
The 1734-OX2 is a POINT I/O 2-Relay Output Module by Allen-Bradley and Rockwell Automation. This hardware can accommodate up to 240 Volts Alternating Current with a resistive load of up to 2 Amperes. The 1734-OX2 has a power output rating between 2 Amperes at 5.28 Volts Direct Current and 2 amperes at 240 Volts Direct Current.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1734-OX2 is an Allen-Bradley POINT I/O 2-Relay Output Module. This unit is an output module with a double C electromechanical output relay. This Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module has a total current drain of 2 milliamperes (mA). It has a load-dependent output voltage ranging from 5 to 28.8 Volts Direct Current with a resistive load of up to 2 Amperes. This Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module can also accommodate up to 240 Volts Alternating Current with a resistive load of up to 2 Amperes. This Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module has a power output rating between 2 Amperes at 5.28 Volts Direct Current and 2 amperes at 240 Volts Direct Current. This 1734-OX2 POINT I/O module also includes a maximum power rating of 250 Watts at 125 Volts Alternating Current with a resistive output to 31 Volt-amperes (VA) at 125 Volts Direct Current inductive output.
The Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module has a contact resistance of 30 milliohms and a switching frequency of one operation per 3 seconds at 0.3 Hertz. This 1734-OX2 POINT I/O module has a maximum Operate/Release time of 10 milliseconds and an average bounce time of 1.2 milliseconds. This Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module has a release time of 10 milliseconds and a minimum load contact of 5 milliampere for each point. The half-life of every electrical contact is approximately 1 million cycles (resistive) or 100,000 cycles (inductive). The Allen-Bradley 1734-OX2 POINT I/O 2-Relay Output Module has four colored LED indicator lights available in three different colors.
Manufacturer: | Rockwell Automation |
Brand: | Allen-Bradley |
Series: | POINT I/O |
Module Type: | Digital Contact Module |
Outputs: | 2 Form C relays, isolated |
POINTBus Current: | 100 milliamps |
Power Dissipation, Max: | 0.5 Watts |
Thermal Dissipation: | 1.7 British thermal unit/hour |
Output voltage: | 5-28.8 Volts Direct Current |
Indicators: | 2 green/red and 2 yellow |
Shipping dimensions: | 2.21 x 0.47 x 2.97 inches |
Weight: | 1.15 ounces |
Operating Humidity Level: | 5%-95% Relative Humidity, Non-Condensing |
Operating Temperature Range: | -4 to 131 degrees Fahrenheit |
Question: Does Automation Stop offer repairs on the 1734-OX2?
Answer: Yes. We offer repairs for the 1734-OX2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-OX2?
Answer: If you buy the 1734-OX2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-OX2 online?
Answer: Yes. Automation Stop sells the 1734-OX2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-OX2?
Answer: The 1734-OX2 is made by Allen Bradley - PLC.
Question: What type of product is the 1734-OX2?
Answer: The 1734-OX2 is part of the Point I/O 1734 series.
Question: What Brand: is included with the 1734-OX2?
Answer: The 1734-OX2 has a AB Brand:.
Question: What is the Indicators: of the 1734-OX2?
Answer: The Allen Bradley 1734-OX2 has a Indicators: of 2 green/red and 2 yellow.
Question: What Manufacturer: does the Allen Bradley-Rockwell Automation 1734-OX2 have?
Answer: The Allen Bradley-Rockwell Automation 1734-OX2 has a Rockwell Automation Manufacturer:.
Question: What Module Type: does the Allen Bradley/Rockwell Automation 1734-OX2 have?
Answer: The 1734-OX2 has a Digital Contact Module Module Type:.
Question: Does the Rockwell-Automation 1734-OX2 have a Operating Humidity Level:?
Answer: 5%-95% Relative Humidity, Non-Condensing.
Question: What Operating Temperature Range: does the Rockwell-Automation 1734-OX2 have?
Answer: The 1734-OX2 has a Operating Temperature Range: of -4 to 131 degrees Fahrenheit.
Question: What Output voltage: does the Allen Bradley-Rockwell Automation 1734-OX2 have?
Answer: The Allen Bradley-Rockwell Automation 1734-OX2 has a Output voltage: of 5-28.8 Volts Direct Current .
Question: What Outputs: does the 1734-OX2 have?
Answer: The Outputs: of the 1734-OX2 is 2 Form C relays, isolated.
Question: What POINTBus Current: does the Rockwell Automation 1734-OX2 have?
Answer: The POINTBus Current: of the Rockwell Automation 1734-OX2 is 100 milliamps.
Question: What Power Dissipation, Max: does the Allen Bradley-Rockwell Automation 1734-OX2 have?
Answer: The Power Dissipation, Max: of the 1734-OX2 is 0.5 Watts.
Question: What Series: is included with the Allen Bradley Automation 1734-OX2?
Answer: The Allen Bradley Automation 1734-OX2 has a POINT input/output Series:.
Question: What is the Shipping dimensions: of the 1734-OX2?
Answer: The Allen-Bradley 1734-OX2 has a Shipping dimensions: of 2.21 x 0.47 x 2.97 (in).
Question: What is the Thermal Dissipation: of the 1734-OX2?
Answer: The Allen Bradley/Rockwell Automation 1734-OX2 has a Thermal Dissipation: of 1.7 British thermal unit/hour.
Question: What is the Weight: of the Allen Bradley/Rockwell Automation 1734-OX2?
Answer: The Weight: of the 1734-OX2 is 1.15 ounces.
For additional information about 1734-OX2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-OX2.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-OX2/A | 1734-OX2 Ser A, Series A, Rev A | Request a Quote |
1734-OX2/B | 1734-OX2 Ser B, Series B, Rev B | Request a Quote |
1734-OX2/C | 1734-OX2 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.